Bedienungsanleitung Sharp K-71F28AM2 (Seite 17 von 126) (Deutsch, Englisch, Dänisch)

786959

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

EN - 14

on the Temperature display. This can be

adjusted using the and 

sensor buttons on the side of the display.

The temperature can be adjusted within

the range of 50°C to 275°C.

After the desired function has been

selected, and the temperature and time

are set, touch the  sensor

to start the oven function operation.

Adjusting the Time of Day

When the oven has been installed, the

time of day must be set according to the

following instructions.

Touch the  sensor to switch the

oven on and enter “” mode. During

this mode, touch the  sensor button

until the time is selected. The symbol for

the time will illuminate on the left side

and you can adjust it using the 

and  sensor buttons. To complete

the time adjustment, touch the 

sensor once again.

The time will only have to be set again if

the appliance is disconnected from the

power supply for a long period of time.

Adjusting the Cooking Time

The cooking time can be adjusted during

“” mode or during “”

mode.



Touch the  sensor until the Minute

Minder symbol illuminates on the Time

display and “” appears. Adjust

the desired time period for the warning

signal using the  and  sensor

buttons while the symbol is ashing. When

you have completed the adjustment, do

not press any buttons for a few seconds,

then the Minute Minder timer will be set.

When the timer reaches zero, an audible

warning will sound, and the Minute Minder

symbol and “” will flash on the

Time display. Press any button to stop

the audible warning and the symbol will

disappear.

Adjusting the Cooking Duration Time

This function helps you to cook for a

fixed period of time. Prepare the food

for cooking and put it in the oven. Then,

select the desired cooking function and

the temperature. Touch the  sensor

button until you see the Duration Time

symbol on the Time display. Set the

required cooking period using the 

and  sensors while the timer is in

this position. When you have completed

the adjustment, wait until the current time

of day is displayed and until the Duration

Time symbol remains illuminated.

When the timer reaches zero, the oven will

switch off, an audible warning will sound

and the Duration Time symbol will ash

on the Time display. Touch any sensor on

the control unit to end the sound.

Adjusting the Cooking End Time

This function is used to begin cooking

after a certain period of time and for a

specic duration of time. Prepare the food

for cooking and put it in the oven. Then,

select the desired cooking function and

the temperature.

Touch the  button until you see the

Cooking Duration Time symbol on the

Time display. Set the required cooking

period using the  and  sensor

while the timer is in this position. When

you have completed the adjustment, wait

until the current time of day is displayed

and until the Cooking Duration Time

symbol remains illuminated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp K-71F28AM2 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp K-71F28AM2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info