Bedienungsanleitung Sharp KF-76FIDD19WM (Seite 22 von 107) (Deutsch, Englisch, Französisch, Italienisch)

786052

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

1- Zvogëlimi i kohë matësit

2- Treguesi i kohë matësit

3- Treguesi i zonës së kohë matësit

4- Selektimi i kohës

5- Koha e Rritjës

Përdorni zonat e gatimit me induksion

me enë gatimi të përshtatshme.

Pas përdorimit të tensionit të rrjetit,

pllaka është në modalitetin e

gatishmërisë dhe është gati për

funksionim.

Vatra kontrollohet nga përdorimi i

Use the corresponding knob to set the

cooking level from 0 to 9. The element

is now ready to use. For fast boil times,

keep the knob at the “P” position for 2

seconds to activate the Boost function

and then adjust to the desired level.

Switching the Cooking Zones Off

Adjust the knob to“0”.

If the cooking zone is hot, “H” will be

displayed instead of “0”.

Residual Heat Indicator

The residual heat indicator indicates

that the glass ceramic area has a

temperature that is dangerous to touch.

After switching off the cooking zone,

the respective display will show “H”

until the corresponding cooking zone

temperature is at a safe level.

Safety Switch-Off Function

A cooking zone will automatically switch

off if the heat setting has not been

modified for a specified duration of

time. A change in the heat setting of the

cooking zone will reset the time

duration to the initial value. This initial

value depends on the selected

temperature level, as shown below.

Heat setting Safety switch off after

1-2 6 Hours

3-4 5 Hours

5 4 Hours

6-9 1.5 Hours

Timer Function

Cooking Zone Timer (1 - 99 min.)

When the hob is switched on, an

independent timer can be programmed

for each cooking zone.

Select a cooking zone, then select the

temperature setting and, finally,

activate the timer setting button , the

timer can be programmed to switch off

a cooking zone. Four LEDs are

arranged around the timer that indicate

which cooking zone the timer has been

set for.

10 seconds after the last operation, the

timer display will change to the timer

that will run out next (in cases where a

timer is set for more than one cooking

zone).

When the timer has run down, a signal

will sound, the timer display will show

´00` and the assigned cooking zone

timer LED will blink. The programmed

cooking zone will switch off and “H” will

be displayed if the cooking zone is hot.

The sound signal and the blinking of

the timer LED will stop automatically

after 2 minutes and/or by pressing any

button.

Buzzer

While the hob is in operation, the

following activities will be signalled by

the buzzer.

•Normal button activation will be

accompanied with a short sound

signal.

•Continuous button operation over

a longer period of time (10

seconds) will be accompanied with

a longer, intermittent sound signal.

EN -15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp KF-76FIDD19WM Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp KF-76FIDD19WM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info