Bedienungsanleitung Sharp LC -42RD2EA (Seite 26 von 40) (Englisch)

559932

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

DTV menu operations

Favourite

Assign services to 4 different favourite groups.

1 Press a/b to select the desired service.

2 Press on the remote control. A selection box

displays.

3 Press a/b to register the selected service to any

of the 4 favourite groups (None, Fav 1 ... Fav 4)

and then press OK. An icon displays indicating

the favourite status.

• Do not press END to exit the screen here if you wish

to register the change.

4 Press OK.

5 Now you can easily select your favourite service

from the Programme List. (See page 30.)

NOTE

• You cannot register the same service to two different

favourite groups.

Move

Sort the order of the selected service by moving the

service position.

1 Press a/b to select the desired service.

2 Press on the remote control. An icon displays

indicating the service to be moved.

• Pressing will turn the move icon on and off.

3 Move the selected service to the desired position

using a/b, and then press OK.

• Do not press END to exit the screen here if you wish

to register the change.

4 Press OK to register the change.

Lock

When the service is locked, you must enter your PIN

whenever you tune to the service.

1 Press a/b to select the desired service.

2 Press on the remote control.

If you have already set the PIN, enter it here. If

not, enter the factory preset PIN “1234”.

An icon displays indicating the service is locked.

• Pressing will turn the lock icon on and off. (PIN

entry is required when lifting the lock icon.)

• Do not press END to exit the screen here if you wish

to register the change.

3 Press OK.

NOTE

• See page 17 for setting the PIN.

Move To

Use this function to change the position of two selected

services.

1 Press a/b to select the desired service.

2 Press on the remote control.

3 Enter the number you want to change to using

- numeric buttons, and then press OK. The

positions of the selected services are switched.

• Do not press END to exit the screen here if you wish

to register the change.

• You cannot enter a service number that is not listed.

4 Press OK again, the message “Successfully

updated” displays. The change is now registered.

Skip

Services that are set to skip will not be picked up when

pressing P (s/r).

1 Press a/b to select the desired service.

2 Press on the remote control. An icon displays

indicating the service to be skipped.

• Pressing will turn the skip icon on and off.

• Do not press END to exit the screen here if you wish

to register the change.

3 Press OK.

NOTE

• To view services that are set to be skipped, use -

numeric buttons or select from the Programme List.

EXAMPLE:

Moving “002 ZDF” ahead of “001 ARD”.

Default order: Press a/b to select the desired service in

001rs002rs003rs004.

Sorted order: Press a/b to select the desired service in

002rs001rs003rs004.

002 ZDF

001 ARD

003 SAT. 1

004 RTL

001 ARD

002 ZDF

003 SAT. 1

004 RTL

001 ZDF

002 ARD

003 SAT. 1

004 RTL

001 RTL

002 ARD

003 SAT. 1

004 ZDF

LC-42RD2EA_GB_d 07.6.20, 5:39 AM24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC -42RD2EA Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC -42RD2EA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info