Bedienungsanleitung Sharp LC-10A3UB US Operation Manual (Seite 6 von 37) (Englisch, Französisch)

13253

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and

many years of trouble-free operation of your product, please read the Safety Precau-

tions carefully before using this product.

IMPORTANT SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property

damage if improperly handled. This product has been engineered and manufactured with the highest

priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent

potential danger, please observe the following instructions when installing, operating and cleaning the

product. To ensure your safety and prolong the service life of your LCD color TV product, please read the

following precautions carefully before using the product.

1. Read instructions—All operating instructions must be read and understood before the product is

operated.

2. Keep this manual in a safe place—These safety and operating instructions must be kept in a safe

place for future reference.

3. Observe warnings—All warnings on the product and in the instructions must be observed closely.

4. Follow instructions—All operating instructions must be followed.

5. Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp

cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

6. Attachments—Do not use attachments not recommended by the manufacturer. Use of inadequate

attachments can result in accidents.

7. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen

sink and laundry tub, swimming pool and in a wet basement.

8. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product

on an unstable base can cause the product to fall, resulting in serious personal injuries as well as

damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the

manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the

manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

9. When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops,

excessive force and uneven floor surface can cause the product to fall from the cart.

10. Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not

cover or block these vents and openings since insufficient ventilation can cause overheating and/

or shorten the life of the product. Do not place the product on a bed, sofa, rug or other similar

surface, since they can block ventilation openings. This product is not designed for built-in

installation; do not place the product in an enclosed place such as a bookcase or rack, unless

proper ventilation is provided or the manufacturer’s instructions are followed.

11. Power source—This product must operate on a power source specified on the specification label.

If you are not sure of the type of power supply used in your home, consult your dealer or local

power company. For units designed to operate on batteries or another power source, refer to the

operating instructions.

12. Power cord protection—The power cords must be routed properly to prevent people from stepping

on them or objects from resting on them. Check the cords at the plugs and product.

13. If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a

SHARP service center or your dealer.

14. The LCD panel used in this product is made of glass. Therefore, it can break when the product is

dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the

LCD panel breaks.

15. Overloading—Do not overload AC outlets or extension cords.

Overloading can cause fire or electric shock.

16. Entering of objects and liquids—Never insert an object into the product through vents or openings.

High voltage flows in the product, and inserting an object can cause electric shock and/or short

internal parts. For the same reason, do not spill water or liquid on the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-10A3UB US Operation Manual Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info