Bedienungsanleitung Sharp LC-20B8U-S Operation Manual (Seite 40 von 45) (Englisch, Französisch, Portugiesisch, Spanisch)

13281

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Troubleshooting (Continued)

Problem Check item

• Make sure the RGB cable is properly connected.

• Make sure the output signal of the PC and the input signal

setting of the LCD TV set are matched.

• Some software prohibit video playback on an external display

when playing back a video with a notebook PC. This is not

attributable to a problem with the LCD TV set.

• Make sure the PC audio cable is properly connected.

• Check if “PC SOUND SELECT” is set to “INPUT5 (PC)”.

• Check if the mute function activates, or if the volume is set to

minimum.

• V-CHIP BLOCK may have been activated while an item other

than “INPUT5 (PC)” is selected in “PC SOUND SELECT”.

• Adjust “CLOCK” and “PHASE” using the FINE SYNC. menu.

• Adjust “H.POS.” and “V.POS.” using the FINE SYNC. menu.

■ Before calling for repair services, make the following checks for possible remedies to the encountered symptoms.

Antenna

Problem Check item

• The reception may be weak.

• The quality of the broadcast may also be bad.

• Make sure the antenna is facing the right direction.

• Make sure the outside antenna is connected.

The picture is not sharp.

The picture moves.

The picture is doubled or

tripled.

• Make sure the antenna is facing the right direction.

• There may be reflected electric waves from mountains or buildings.

The picture is spotted.

• There may be interference from automobiles, trains, high voltage lines,

neon lights, etc.

• There may be interference between the antenna cable and AC cord. Try

positioning them further apart.

There are stripes on the

screen or colors fade.

• Is the unit receiving interference from other devices?

Transmission antennas of radio broadcasting stations, transmission

antennas of amateur radios and cellular phones may also cause interfer-

ence.

• Use the unit as far apart as possible from devices that may cause possible

interference.

■ Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not

a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as

this may cause the cabinet to deform and the LCD panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

–

Reference

page

There is no image.

There is no sound.

The text is blurred.

The image is not displayed in

the center of the screen.

LC-20B8U_E_P36-42.p65 05.2.3, 2:07 PM39

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-20B8U-S Operation Manual Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info