13303
17
Zoom out
Zoom in
Vorherige Seite
1/81
Nächste Seite
16
Watching TV
Display
AVC System
POWER button
MODE
AV
TV
ANT-A/B
INPUT
SURROUND
FRONT
TWIN
POWER
MTS CC
PICTURE
SELECT
SUB TWIN CH
FREEZE
MODE
VIEW
SLEEP LEARN
EDIT/
ENT
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
100
0
Turning on the power
1 Press MAIN POWER on the Display.
The POWER indicator on the Display flashes red.
2 Press MAIN POWER on the AVC System.
The System turns the power on.
The POWER indicator on the Display lights up green
and the STANDBY/ON indicator on the AVC System
lights up in green.
If the STANDBY/ON indicator on the AVC System and
the POWER indicator on the Display still light up red,
press TV POWER on the remote control unit or MAIN
POWER on the AVC System to turn the System on.
First time turning on the AVC System
1 Press MAIN POWER on the AVC System.
The STANDBY/ON indicator on the AVC System lights
up red.
2 Press MAIN POWER on the Display.
The System turns the power on.
The POWER indicator on the Display lights up green
and the STANDBY/ON indicator on the AVC System
lights up in green.
If the STANDBY/ON indicator on the AVC System and
the POWER indicator on the Display still light up red,
press TV POWER on the remote control unit or POWER
button on the Display to turn the System on.
A
In this manual, System means the Display and AVC Sysytem.
Turning off the power
1 Press TV POWER on the remote control unit or
POWER button on the Display.
The System enters standby mode and the image on
the screen disappears.
Both the STANDBY/ON indicator on the AVC System
and the POWER indicator on the Display change from
green to red.
2 Press MAIN POWER on the AVC System.
The STANDBY/ON indicator on the AVC System turns
off and the POWER indicator on the Display flashes
red.
3 Press MAIN POWER on the Display.
The POWER indicator on the Display turns off after
approximately 5 seconds.
A
If you are not going to use this System for a long time, be sure to
remove the AC cord from the power outlet.
STANDBY/ON indicator
MAIN POWER
MAIN POWER
Off
Flashing red
Red
Green
Display status indicator
Power off
AVC System does not turn on or its AC cord is disconnected.
The System is in standby mode.
The System turns the power on.
AVC System status indicator
Power off
Only the AVC System is in standby mode or the System is in standby mode.
The System turns the power on.
Off
Red
Green
POWER indicator
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-30HV2U Operation Manual wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info