Bedienungsanleitung Sharp LC-32CFE5221E (Seite 9 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

654895

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

the television. Further details of how to do this will be issued with the

 rmware. Contact the helpline or refer to the ‘www.sharp.eu’ website.

Software Upgrade (NET)* - Allows for the TV software to be updated over

the Internet. This function will search for new software and update it when

necessary. For this function the TV needs to be connected to the internet

and USB storage device with at least 200MB of free space connected to it.

NOTE: The TV will automatically search for new releases of software

every time it is turned on. If new software is found, it will ask you if you

would like to download and install it. If you select "Yes" the TV will upgrade

to the latest software. It is necessary to connect a USB storage device

to the TV with at least 200 MB of free space, before upgrade starts.

WARNING: Do not turn o the TV’s power until the upgrade is complete!

Reset TV - This resets the menus to factory settings.

HDMI CEC** - Allows you to operate devices

connected via HDMI with TV remote control.

 Auto standby - Automatically turn on/

o connected devices via HDMI CEC

 Device list - Allows you to access devices menu and

operate the menu using TV remote control.

 HDMI ARC - Sends audio signal from terrestrial/satellite broadcast

via HDMI to the AV receiver without using any additional audio

cables, this functions is available only on HDMI 2 output.

LED Status - Allows the user to switch the LED Power indicator light ON

or OFF, when the TV is being operated. (When this option is set to OFF

the LED Power indicator light will ﬂash when the remote control is used)

Version Info - shows version of TV software

Store Mode*** - switch ON/OFF shop demonstration mode

* - Only for models with DVB-T2 tuner

** - HDMI CEC must be supported by connected device.

*** - available only if store mode was selected during  rst time instal-

lation



7 Day TV Guide

TV Guide is available in Digital TV mode. It provides information about

forthcoming programmes (where supported by the Digital channel). You

can view the start and end time of all programmes and on all channels for

the next 7 days and set reminders.

1. Press

[TV GUIDE]. The following 7 Day TV Guide will appear.

2. Navigate through the menu using

▲/▼/◄/►.

You can now:

Record selected TV channel and TV show by pressing the RED button.*

Set areminder by pressing GREEN.

View aprevious day by pressing YELLOW.

View the next day by pressing BLUE.

[INFO] shows detailed

information about the selected post

3. Press

[EXIT] to exit the 7 day TV Guide.

* - only for models with recording function



USB mode / Media player

USB mode o ers playback of various di erent types of content that you

have saved on your USB Memory Stick. On switching to USB source the

USB mode menu screen will appear. The content will be divided into Photo,

Music, Movie and Text based on  le type.

1. You can navigate through the menus using the scroll

▲/▼/◄/►buttons. To con rm the item you wish to play/view press

[OK]

button.

2. Select the drive you require. (If your drive only has 1 partition you will

only see 1 item).

3. You can now access the item. Press OK to view.

4. While viewing you may control the item playback modes by using the

remote control buttons or by invoking playback navigation menu and

selecting on-screen buttons

▲/▼/◄/► and [OK]

NOTE: USB extension cables are not recommended as

they can cause a reduction in picture/audio quality and

stoppages during play back of USB content.



USB Record - Digital mode*

Built into this television is aUSB record facility. This function is available in

Digital mode when used in conjunction with acompatible USB memory

stick or USB Hard drive. The bene ts of this are as follows:

• Pause live TV and then playback, fast forward and rewind (up to live TV).

• One button record, if you decide you want to record the current

programme.

• Easy programmable recording from the 7 day TV Guide

Due to the nature of the product, it is necessary to use ahigh speed USB

memory stick (as the TV reads from and writes to the memory stick at the

same time, some memory sticks may not be suitable).

Minimum Speci cation - USB Memory Stick

 Read Speed - 20 MB/s(Mega Byte Per Second)

 Write Speed - 6 MB/s(Mega Byte Per Second)

Pause Live TV (Time Shift) *

Pausing Live TV is very simple.

 Press the play/pause button and the television will pause and the live

content will be recorded. To resume watching press play/pause again.

 Press fast forward to go forward in arecording (i.e. to skip adverts).

 Press fast rewind to go back in arecording

(i.e. if you fast forwarded too far).

TIP: When you switch the TV to standby or change channel the Time Shift

memory is wiped. To restart time shift you must press play/pause button.

One Button Record

At any point in time you may decide to record the current channel that you

are watching. To do this you need to press the [REC] button.

TIP: This television contains one TV tuner, therefore it can

only record the channel you are watching or record one

channel while the television is in standby mode.

NOTE: USB record function is only available in Digital TV mode.

Due to copyright laws and illegal copying/recording it is not

possible to record to/from any other input/output source.

* - only for devices with built in PVR function

Sharp LC-32CFE5221E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info