Bedienungsanleitung Sharp LC-32CHE6242E (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

635706

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite



What is included in the box

Supply of this TV includes following parts:

• 1x TV • 1x RF cable

• 1x Remote control • 1x TV stand installation packet

• 2x AAA batteries • 1x User guide

• 1x Mini Component adapter

cable

• 1x Mini Composite adapter

cable



Attaching the Stand

Please follow the instructions on last page of this user manual.



Getting started - initial set up

1. Using the RF cable supplied, connect the TV to the TV Aerial wall

socket. Connect the power cable to the Electrical outlet.

2. For connecting to the Internet with a wired connection connect a

Cat 5/Ethernet cable (not included) from the TV to your broadband

modem/router.

3. Insert the batteries supplied into the Remote control.

4. Press and hold GREEN and YELLOW buttons together for more than

3 seconds to pair remote control with your TV. Then press Standby

button to power on TV.

5. You will be now welcomed with the First Time Installation screen.

If it does not appear, on the remote control, please press [MENU] then

8-8-8-8 and the menu will appear.

If you wish to make changes to any of the default settings, use the

scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]

button.

6. Please set desired settings in FIRST TIME INSTALLATION screen.

DVB Antenna - You can choose between Terrestrial (DVB-T), Cable

(DVB-C) or Satellite (DVB-S)*.

Language - Set the TV Menu language.

Country - Set the desired country.

Tunning Mode - Choose if you want to tune only Digital (DTV)

Analogue (ATV) or both Digital and Analogue (DTV + ATV)

Operator - Select Cable provider. If your cable operator is not listed

select Others. (Avaliable only if DVB Antenna is set to CABLE)

Environment - Select the location of TV.

For home use, please select Home Mode.

For shop demonstration mode, set Store Mode.

Sorting by LCN - Set LCN to ON if you want to arrange channels by

provider preferences (only applies to DVB-T and DVB-C channels).

7. Press [Auto Tuning] button to start the tuning process.

8. Optional channel presets DVB-C:

Keep all default settings as recommended.

If DVB-C channels are not found, contact your network provider for the

valid "Network ID". Then perform anew search. Press the [MENU], select

"Network ID" and enter the network ID.

9. Optional channel presets DVB-S2*: Select "Satellite" in the "DVB

Antenna" in the menu for the optional channel presets. Here you can

choose between the various satellites. Since selection completed, then

the channel list of the exact satellite will be available to be imported

into your TV system.

Con rm with [OK] button on the remote control, to start scanning.

TIP: If you are missing channels, the reason for this is likely to be signal

strength, you should consider connecting signal booster and re-tuning the TV.

* - Available only for TVs with DVB-S tuner



Remote control

Radio controlled remote control - No more aiming in the TV direction!

Refer to remote control picture on the second page of this user

manual.

STANDBY – Switch on TV when in standby or vice versa.

MUTE – Mute the sound or vice versa.

3. NET+ – Displays AQUOS NET+ menu.

4. DTV – Switch to digital TV source.

5. USB – Switch to USB source.

6. YouTube – Displays YouTube application YouTube – Displays YouTube

application

7. 0 – 9 – to select aTV channel directly.

8. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).

– To return to the previous channel viewed.

10. VOL ▲/▼ – To increase / decrease the sound level.

11. SOUND – Scrolls through sound mode options.

12. PICTURE – Scrolls through picture mode options.

13. SOURCE – To display the input/source menu.

14. CH ▲/▼ – To increase or decrease the channel being watched.

15. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

16. MENU – To display OSD menu.

17. EXIT – To exit all menus.

18. BACK – Back to previous menu.

19. FAV – To display favourites menu.

20. INFO – Press once for now/next channel information. Press twice for

programme information about current programme.

21. SLEEP – Press repeatedly to cycle through the sleep options.

22. AUDIO – To change the audio language (if available).

23. SUBTITLE – To switch the dialogue at the bottom of the screen (on/

o ).

24. TEXT – Teletext mode - To enter Teletext

25. TEXT HOLD – Teletext mode - Hold current page which is displayed

26. ZOOM – To zoom in

27.

DISPLAY – To switch o the screen when listening to radio

28. Rec

– PVR Record

29. Rec List

– Opens the list of recordings.

30.

– To restart the current chapter

31.

– To advance forward to the next chapter

32.

– To stop the playback

33.

– To play in fast rewind mode.

34.

– To play in fast forward mode.

35.

– To play/pause

36. COLOUR BUTTONS

– Additional teletext and OSD functions

- available only with PVR function

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-32CHE6242E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info