Bedienungsanleitung Sharp lc 32dh77e (Seite 29 von 48) (Englisch)

143829

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Basic adjustment

Channels with “Skip” set to “On” are passed over

when using Pr/s even if selected while watching

the image from the TV.

When connecting a decoder to the TV, you need to

select “EXT1” or “EXT2”.

NOTE

The factory preset value is “Off”.•

You can block the viewing of any channel.

NOTE

See “Child Lock” for setting a PIN.

When “Lock” is set to “On” for a channel, “Child lock has

been activated” displays, and the image and sound of the

channel are blocked.

When pressing 6 while “Child lock has been activated”

displays, the PIN input window will display. Inputting the

correct PIN unlocks the “Child Lock” temporarily until the

power is turned off.

Sort

Channel positions can be sorted freely.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want

to move, and then press OK.

Press a/b/c/d to move it to the desired

position, and then press OK.

Repeat steps 2 and 3 until all desired channels

are sorted.

Erase Programme

Channels can be erased individually.

Press c/d to select “Yes”, and then press OK.

Press a/b/c/d to select the channel you want

to erase, and then press OK.

A message window pops up.

Press c/d to select “Yes”, and then press

OK to erase the selected channel. All the

subsequent channels move up.

Repeat steps 2 and 3 until all desired channels

are erased.

•

Programme Setup

Setup

Analogue Setting

You can reconfigure the analogue TV channels settings

automatically or manually.

Additional Search

Use this menu to add new channels automatically after

auto installation has been made.

Start searching channels after selecting the colour system

and sound system.

Manual Adjust

Use this menu to set up analogue TV channels

manually.

After selecting “Yes” on the screen, press a/b/

c/d to select the channel you want to set and

then press OK.

•

You can adjust the frequency to the desired position.

NOTE

Adjust while checking the background picture as a

reference.

Instead of pressing c/d to adjust the frequency, you

can set by directly entering the frequency number of the

channel with 0–9 numeric buttons.

EXAMPLE

179.25 MHz: Press 1 s 7 s 9 s 2 s 5.

49.25 MHz: Press 4 s 9 s 2 s 5 s OK.

•

Select the optimum colour system to receive (“Auto”,

“PAL”, “SECAM”).

Select the optimum sound systems (Broadcasting

systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

When a TV channel sends its Network Name, the

“Auto Installation” detects the information and assigns

a name to it. However, you can change channel names

individually.

Press a/b/c/d to select each character of the

new name for the channel, and then press OK.

Repeat step 1 above until the name is fully spelt

out.

NOTE

The name can be five characters or less.

If a channel name is less than five characters, select “END”

to set the channel name.

•

Analogue channel settings

Fine

Colour sys.

Sound sys. (Broadcasting systems)

Label

Skip

Decoder

Lock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp lc 32dh77e Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp lc 32dh77e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info