Bedienungsanleitung Sharp LC-32GP1U (Seite 56 von 62) (Englisch)

662082

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Troubleshooting

Possible Solution

• Is the volume too low? (See page 20.)

• Is “Variable” selected in “Output Select”? (See page 39.)

• Have you pressed MUTE on the remote control unit? (See page 20.)

• Is “On” selected in “Subwoofer”? (See page 29.)

Cautions regarding use in high and low temperature environments

Appendix

Problem

• No power

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off/with sidebar

screen.

• Strange color, light color, or color

misalignment

• Power is suddenly turned off.

• No picture

• No sound

• Check if you pressed TV POWER on the remote control unit. (See page 17.) If the

indicator on the TV does not light up, press POWER on the TV.

• Is the AC cord disconnected? (See page 7.)

• Has the power been turned on? (See page 17.)

• External inﬂ uences such as lightning, static electricity, may cause improper operation.

In this case, operate the unit after ﬁ rst turning on the power of the TV or unplugging

the AC cord and replugging it in after 1 or 2 minutes.

• Is the FUNCTION set correctly? Set it to the TV setting position.

• Are batteries inserted with polarity (

) aligned? (See page 8.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light illuminated near the remote control sensor?

• Is the image position correct? (See page 35.)

• Are screen mode adjustments such as picture size made correctly? (See pages 37

and 38.)

• Adjust the picture tone. (See pages 27 and 28.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the input signal setting. (See page 40.)

• Is the sleep timer set? (See page 36.)

• Check the power control settings. (See page 30.)

• The unit's internal temperature has increased. Remove any objects blocking vent or

clean.

• Is connection to other components correct? (See pages 13 to 16.)

• Is correct input signal source selected after connection? (See page 31.)

• Is the correct input selected? (See pages 31 and 32.)

• Is picture adjustment correct? (See pages 27 and 28.)

• Is “On” selected in “Audio Only”? (See page 39.)

• Is a non-compatible signal being input? (See page 16.)

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature:

4°F to

140°F (

20°C to

60°C)

Troubleshooting-Digital broadcasting

The error message about reception of broadcast

• Failed to receive broadcast.

E203 • Check the broadcast time in the program guide.

The example of an error message

displayed on a screen

• No broadcast now.

Error code

E202

Possible Solution

• Check the antenna cable. Check that the antenna is correctly

setup.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-32GP1U Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info