Bedienungsanleitung Sharp LC-32LD145V (Seite 14 von 26) (Englisch)

526634

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

English - 13 -

If the writing speed of the connected USB disk is not

sufcient, the recording may fail and the timeshifting

feature may not be available.

It is recommended to use USB hard disk drives for

recording HD programmes.

Do not plug out the USB/HDD during a recording. This

may harm the connected USB/HDD.

Multipartition support is available. The maximum of

two different partitions are supported. The rst partition

of the USB disk is used for PVR ready features. It also

must be formatted as the primary partition to be used

for the PVR ready features.

Some stream packets may not be recorded because

of signal problems, so sometimes video may freezes

during playback.

Record, Play, Pause, Display (for PlayListDialog)

keys can not be used when teletext is ON. If a

recording starts from timer when teletext is ON,

teletext is automatically turned off. Also teletext usage

is disabled when there is an ongoing recording or

playback.

Timeshift Recording

Press (PAUSE) button while watching a broadcast

to activate timeshifting mode. In timeshifting mode,

the programme is paused and simultaneously

recorded to the connected USB disk.

Press (PLAY) button again to resume the paused

programme from where you stopped. Press the STOP

button to stop timeshift recording and return to the

live broadcast.

Note: Timeshift cannot be used while in radio mode.

Note : You cannot use the timeshift fast reverse feature before

advancing the playback with the fast forward option.

Instant Recording

Press (RECORD) button to start recording an

event instantly while watching a programme. You can

press (RECORD) button on the remote control

again to record the next event on the EPG. In this

case, an OSD will be displayed, indicating the

programmed events for recording. Press (STOP)

button to cancel instant recording.

Note: You can not switch broadcasts or view the Media Browser

during the recording mode. While recording a programme or

during the timeshifting, a warning message appears on the

screen if your USB device speed is not sufcient.

Watching Recorded Programmes

Select the Recordings Library from the Media Browser

menu. Select a recorded item from the list using

navigation buttons (if previously recorded).

Press the OK button to view the Play Options. Select

an option then press OK button.

Note: Viewing main menu and menu items will not be available

during the playback.

Press the (STOP) button to stop a playback and

return to the Recordings Library.

Slow Forward

If you press (PAUSE) button while watching

recorded programmes, the slow forward feature will

be available. You can use button to slow forward.

Pressing button consecutively will change slow

forwarding speed.

Recording Conguration

Select the Recording Configuration item in the

Settings menu to congure the recording settings.

Format Disk: You can use Format Disk feature

for formatting the connected USB disk. Your pin is

required to use the Format Disk feature (default pin

is 0000).

IMPORTANT: Note that ALL the data stored on the

USB disk will be lost and the disk format will be

converted to FAT32 if you activate this feature. If

your USB disk malfunctions, you can try formatting

the USB disk. In most cases formatting the USB disk

will restore normal operation; however, ALL the data

stored on the USB disk will be lost in such a case.

Note: If “USB is too slow” message is displayed on the

screen while starting a recording, try restarting the recording.

If you still get the same error, it is possible that your USB

disk does not meet the speed requirements. Try connecting

another USB disk.

Media Browser Menu

You can play photo, music, and movie les stored on a

USB disk by connecting it to your TV. Connect a USB

disk to one of the USB inputs located on the side of

the TV. Pressing the MENU button while in the Media

Browser mode will access the Picture, Sound and

Settings menu options. Pressing the MENU button

again will exit from this screen. You can set your Media

Browser preferences by using the Settings Menu.

Loop/Shufe Mode Operation

Start playback with and

activate

TV plays next file and loop

the list.

Start playback with OK and

activate

the same le will be played in a

loop (repeat).

Start playback with OK/ and

activate

the le will be played in a shufe.

Quick Menu

Quick Settings menu allows you to access some

options quickly. This menu includes Power Save

Mode, Picture Mode, Equalizer Settings, Favourites

and Sleep Timer options. Press Q.MENU button on

the remote control to view quick menu. See the

following chapters for the details of the listed features.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-32LD145V Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info