Bedienungsanleitung Sharp LC-32LE362EN (Seite 12 von 35) (Englisch)

567410

Zoom out

Zoom in

Vorherige Seite

1/35

Nächste Seite

English - 11 -

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK.

On the next screen, set your preferences using the

navigation buttons and when nished, press OK to

continue.

You can activate Store Mode option at this point.

This option is intended only for store use. It is

recommended to select Home Mode for home use.

If Store Mode is selected, a conrmation screen will

be displayed. Select YES to proceed. This option

will be available in Other Settings menu and can be

turned off/on later.

Aerial Installation

If you select Aerial option from the search type

selection screen, the television will search for digital

terrestrial TV broadcasts. You can press the MENU

button any time to cancel the search. After all the

available stations are stored, the Channel List will be

displayed on the screen.

Press MENU button to quit channel list and watch TV.

Cable Installation

If you select Cable option and press OK button on

the remote control a confirmation screen will be

displayed. Select YES and press OK to proceed.

To cancel operation, select NO and press OK. You

can select frequency ranges from this screen. Enter

the frequency range manually by using the numeric

buttons. When nished, press OK button to start

automatic search.

Note: Searching duration will change depending on

the selected search step.

Satellite Installation (depends on the model)

If you select Satellite option from the search

type selection screen, you can set a satellite and

watch satellite channels. When you select Satellite

installation, Antenna Type menu will be displayed.

You can select Antenna type as Direct, Unicable

or DiSEqC switch.

Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. After selecting

Direct, another menu screen will be displayed. Select

an available satellite and press OK to scan for services.

If wanted, the default LNB frequency values for the

selected satellite can be edited before starting the

search. The frequency values can be entered in two

ways:

1. The high band value should be “0” and the low

band value should be entered.

2. The high and low band values should be the

same, so this value can be used in search. But

this value cannot be “0”.

These are the standard single LNB search

requirements.

Unicable: If you have multiple receivers and a

unicable system, select this antenna type. Press OK to

continue. Congure settings by following instructions

on the screen. Press OK to scan for services.

DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. After

selecting DiSEqC switch, another menu screen will

be displayed. You can set four DiSEqC options (if

available). Press GREEN button to scan all satellites

or press YELLOW button to scan only the highlighted

satellite. To save and exit press OK button.

While the search continues a message will appear,

asking whether you want to sort channels according

to the LCN (*). Select Yes and press OK to conrm.

(*) LCN is the Logical Channel Number system that

organizes available broadcasts in accordance with a

recognizable channel sequence (if available).

Note: Do not turn off the TV while initializing first time

installation.

(*) Some options may not be available depending on

the country selection.

Media Playback via USB Input

You can connect a 2.5” and 3.5” inch (hdd with

external power supply) external hard disk drives

or USB memory stick to your TV by using the USB

inputs of the TV.

IMPORTANT! Back up your les before making any

connections to the TV. The Manufacturer will not be

responsible for any le damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32

and NTFS disk formatting but recording will not be

available with NTFS formatted disks.

While formatting a USB hard disk that has 1TB (Tera

Byte) or more file capacity, you can experience

problems with the formatting process.

Quickly plugging and unplugging USB devices, is a

very hazardous operation. This may cause physical

damage to the USB player and the USB device itself.

Do not pull out the USB module while playing a le.

Media Browser Menu

You can play photo, music, and video les stored on

a USB storage device or on a media server. Connect

a USB disk to one of the USB inputs located on the

side of the TV. Or connect your media server to the

same network with the TV.

Press the “media browser button - ” on the remote

or press the MENU button and select Media Browser

tab by using Left/Right buttons and press OK. Main

media browser screen will be displayed.

Select the media type to be listed and press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-32LE362EN Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-32LE362EN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info