453002
44
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
42
Updating your TV via DVB-T
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated TV
base software and DVB software available.
Digital setup
Download setup
Searching for updates*
All countries except UK, Sweden and Italy are set to “No” for
this function.
The TV automatically determines whether a new software
version is available when the TV is in standby mode.
Item
Yes
Automatically searches for new software
updates available when the TV is in
standby mode.
No
Does not search for update information.
Now
Checks if there is new software
immediately.
Downloading the software
You can select the method of update.
If the software is updated, the confirmation
message “New download information has
been detected.” appears.
If the TV receives the update service while in standby
mode, a confirmation message displays after turning on
the power.
Follow the screen prompts.
Item
Yes
Starts downloading immediately. It takes
approximately one hour to update. You
cannot carry out other operations while
downloading.
Cancels the download by pressing
; on the remote control unit when
“Discontinue” is displayed on the screen
during the update.
No
Starts downloading automatically several
minutes after entering standby mode.
NOTE
The TV must remain in standby mode for download. Do not
turn off the power using a on the TV.
Updating the software may take some time.
*
1
2
Information
Message list
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
NOTE
When the TV succeeds at downloading new software, the
message is updated in the “Message list” of the “Information”
menu.
The software update will not be carried out if there is no new
software available at the specified download time.
Information
Receiver report
Display reports regarding failures and changes for timer
settings.
Reset
If complex adjustments are made so that the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
Setup
Reset
Go to “MENU” > “Setup” > “Reset”.
Press c/d to select “Yes”, and then press
;.
“Now, TV will restart automatically, OK?” displays on the
screen.
Press c/d to select “Yes”, and then press
;.
“Now initialising...” displays on the screen and blinks.
After the reset has completed, the power shuts off and
then comes back on. The screen will have returned to its
original settings.
NOTE
PIN input is required when executing “Reset”. The default
PIN is “1234”. To change the PIN setting, refer to Password/
Parental lock settings (Page 30). To clear the PIN setting (PIN
input will no longer be needed), refer to CLEARING THE PIN
(Page 41).
Identification
Setup
Identification
You can check the TV ID on the screen for reporting to
customer service.
1
2
3
Appendix
LC-LE705E_GB.indd 42LC-LE705E_GB.indd 42 2009/10/09 14:13:242009/10/09 14:13:24
44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-32LU700S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sharp LC-32LU700S

Sharp LC-32LU700S Bedienungsanleitung - Deutsch - 52 seiten

Sharp LC-32LU700S Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info