Bedienungsanleitung Sharp LC-37GD7 (Seite 17 von 42) (Englisch)

66384

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Changing stations

with the P∧ / P∨ buttons on the remote control

Station up/down

with the numeric buttons of the remote control

The TV set has a dynamic memory. If up to 9 stations are stored, you

only need to enter one digit, up to 99 two digits, up to 999 three digits

and above 999 four digits (please look in the station table to see how

many stations have been stored).

1 digit stations

Press buttons 0 – 9 for one second, and the station

changes instantly.

Or press button 0 – 9 brieﬂ y, the station then changes

after 2 seconds (the station changes immediately when

only 9 stations are stored).

2 digit stations

After brieﬂ y pressing the ﬁ rst numeric button keep the

second numeric button pressed for one second, the sta-

tion then changes immediately.

Or press both numeric buttons brieﬂ y, the station then

changes after 2 seconds (the station changes immedi-

ately when only 99 stations are stored).

3 digit stations

After brieﬂ y pressing the ﬁ rst and second numeric button

keep the third numeric button pressed for one second,

the station then changes immediately.

Or press the three numeric buttons brieﬂ y, the station

then changes after 2 seconds (the station changes im-

mediately when only 999 stations are stored).

4 digit stations

Press the four numeric buttons brieﬂ y, the station then

changes immediately..

Switch on/off

Your TV is equipped with an eco-standby power supply unit. On standby

the power consumption drops to low power (see page 36). Weak electric

power is still consumed even if the the unit is switched off by the ON/

OFF switch.

Attention: If you want to switch the TV set completely off you have to

remove the plug of the mains power cable from the mains power socket.

However bear in mind that in both cases EPG data will be lost and pro-

grammed timer recordings will not be performed by the TV.

Switching off

If the TV set is switched on (Mode indicator lights

green), you can switch it to standby using the red ON/

OFF button of the remote control.

The mode indicator on the TV set lights red. If the mode

indicator lights orange, a timed recording is made, EPG

data is entered or radio operation without screen display

is active.

Switching on the TV set

From standby it is best to switch back on with the red

ON/OFF button or with the numeric buttons (0 – 9) of

the remote control.

Or switch on the TV set with OK, you can see the station

table and select a station.

RADIO

Switching the Radio function on *

Radio mode is only possible if the TV set is equipped for

DVB-T/S reception or an external radio receiver is con-

nected to the AV connections EXT 1, EXT2 .

If you switch off the TV set with the

ON/OFF button

on the top of the set to standby, the mode indicator on

the TV set is no longer lit.

The unit then cannot be switched on by the remote

control.

Daily operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-37GD7 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info