Bedienungsanleitung Sharp LC-37GD7 (Seite 33 von 42) (Englisch)

66384

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Video playback

There are several ways to see the picture and hear the sound of the VCR,

DVD player or camcorder on your TV:

You can use the Euro AV sockets on the TV set and on the VCR. This

is the best way to get a good picture and sound quality. Use the EXT 4

input on the left of the TV for camcoders and digital cameras.

When playing from a video recorder with AV Link (or a comparable

system from another manufacturer), the picture from the VCR is

shown at the current programme place.

When playing back from another video recorder, camcorder or digital

camera, select the AV socket to which the video is connected with AV

selection (button

) or with the station table (OK).

Video recorders transmit a switching voltage during playback which

the TV can evaluate (can be activated in the connection wizard or in

the “TV menu” – “Connections” – “Miscellaneous” - “Allow switching

voltage” to “yes”). Then the picture of the video recorder is shown at

the current programme place.

Use the antenna connection between the VCR and the TV. The sound

is only transmitted in mono. Select the ﬁ rst menu item, e.g. VIDEO, in

the AV selection.

Calling an AV programme in the AV selection list

Call AV selection

External sources

VIDEO

EXT1

EXT2

EXT3

EXT4

EXT5

PC IN

Select input source with  (or VIDEO if the video recorder has been

connected via the antenna socket) and conﬁ rm with OK.

Now you will see the playback from the connected AV unit.

Notes:

If channel 0 (Video) is called and a switching voltage is applied to

EXT1 / EXT 2, the TV set switches automatically to this input.

At EXT4 you may either connect a Y/C or CVBS video source (no

simultaneous operation).

Calling AV stations with the station table

Call the station table with the OK button in TV mode.

In the numeric sorting you will always ﬁ nd the input source at the top of

the list without station numbers.

•

Timer recording with video or DVD recorder

You can programme timer recordings on the TV set. Programming can

be done with the EPG (not with DVB-T in UK), analogue teletext or manu-

ally.

Call the “ AVL timer list” menu.

TIMER

30.06. 19:00-19:15 ZDF Heute

AVL timer list Thu 30.06./13:51

press the red button for “New recording”.

Recording wizard

Via EPG

Via teletext (VPS) Manual

Select whether you want to programme the recording by EPG, (ana-

logue) teletext or manually.

Note: Copy protectet Pay-TV broadcasts are not available at the AV

sockets.

When you have connected a recorder which has AV Link or a comparable

system from a different manufacturer, the timer data of analogue terres-

trial stations are transmitted from the TV to the recorder. The recording

quality SQ or EQ is transmitted for DVD recorders addtionally to station,

date and time. The recording is then controlled by the recorder and the

recorder tuner is used for reception of the station. The recording data are

not saved in the timer list of the TV set. You will only ﬁ nd the timer data

in the recorder.

If you want to record from digital stations, the TV tuner is used and the

recorder is controlled by the TV set. Then the programme is locked dur-

ing the timer recording. You can switch over to another station (analogue

terrestrial) if you have a digital tuner (from which you are recording) and

analogue terrestrial reception.

If you have connected a Sharp video recorder with AV Link and you are

using the timer programming of the TV, the TV receiver is always used

for terrestrial stations as well. The TV controls the recording.

You have to set the recorder to the AV input to which the TV set is con-

nected.

The programme is locked during the timer recording. Switching to other

stations is not possible.

AV Link must be switched on on the recorder. Read the operating

instructions of your recorder.

Use only Euro AV cables, which are completely shielded, otherwise AV

Link will not work.

Operating additional equipment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-37GD7 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info