Bedienungsanleitung Sharp LC-37GX3H (Seite 52 von 56) (Englisch)

662081

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Appendix

Wall mounting

NOTE

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

• To use this TV mounted on a wall, ﬁ rst remove the cover at the 4 locations on the rear of the TV, and then use the screws

supplied with the wall mount bracket to secure the bracket to the rear of the TV.

Hanging on the wall

AN-37AG2 / AN-37P30 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting Angular mounting

Handling and precautions with the wall-mounted TV

• You can mount the TV on the wall using the optional AN-37AG2 bracket and AN-37P30 attachment.

• For details, refer to the instructions supplied with the optional bracket.

NOTE

• The AN-37P30 attachment is always required when attaching the AN-37AG2 bracket to a wall.

CAUTION

• This TV should be mounted on the wall only with the AN-37AG2 (SHARP) / AN-37P30 (SHARP) wall mount bracket.

The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the Liquid Crystal Television requires special skill that should only be performed by qualiﬁ ed service

personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper

mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

• You can ask a qualiﬁ ed service personnel about using an optional AN-37AG2 bracket and AN-37P30 attachment to mount

the TV to the wall.

• Carefully read the instructions that come with the bracket before beginning work.

AN-37AG2

AN-37P30

About setting the TV angle

Mount the bracket on the wall by positioning the bracket’s mark that indicates the display’s

centre onto the intersecting point.

•

The following measurement ﬁ gures are rough estimates. The ﬁ gures differ according to the location where you attach the TV.

Mark the monitor’s outline by placing tape at four points on the wall where the LCD-TV’s four

corners’ will lie when it is installed.

• When you mark the monitor’s outline on the wall, make sure that the vertical and horizontal lines are made accurate

to the TV’s dimension.

• Use adhesive tape that will not leave permanent marks.

Make diagonal lines from the four corners and mark their intersecting point.

• Diagonally stretch string and mark the intersecting point in a way that no permanent marks will be left on the wall.

Remove the cover from the stand.

Remove the screws.

Unﬁ x the TV stand.

Fix the wall mount bracket to the LCD-TV.

When adjusting the bracket’s angle, adjust it before installing the TV on the wall.

• The adjusting angles are 0°, 5°, 10°, 15° and 20°.

Attach the TV to the wall mount bracket.

• Attach the TV by aligning the monitor’s four corners with the wall markings.

• When you adjust the TV’s angle, make sure to remove the monitor from the wall.

NOTE

• The above description is for reference. Please mount the TV in a way which properly suits the location.

Remove the tape and the string from the wall.

37GX3H_en_h.indd 5037GX3H_en_h.indd 50 2007/11/14 11:05:042007/11/14 11:05:04

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-37GX3H Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info