Bedienungsanleitung Sharp LC-37SH20U Operation Manual (Seite 47 von 53) (Englisch)

13321

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

Troubleshooting

Possible Solution

• Is the volume too low? (See page 17.)

• Is “Variable” selected in “Output Select”? (See page 34.)

Troubleshooting-Digital broadcasting

The error message about reception of broadcast

• Failed to receive broadcast.

E203 • Check the broadcast time in the program guide.

Cautions regarding use in high and low temperature environments

Appendix

Problem

• No power

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off/with sidebar

screen.

• Strange color, light color, or color

misalignment

• Power is suddenly turned off.

• No picture

• No sound

• Check if you pressed POWER on the remote control unit. (See page 14.) If the

indicator on the TV does not light up, press POWER on the TV.

• Is the AC cord disconnected? (See page 7.)

• Has the power been turned on? (See page 14.)

• External inﬂ uences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after ﬁ rst turning on the power of the TV or

unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Are batteries inserted with polarity (

) aligned? (See page 8.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂ uorescent lighting?

• Is a ﬂ uorescent light illuminated near the remote control sensor?

• Is the image position correct? (See page 30.)

• Are screen mode adjustments such as picture size made correctly? (See page 33.)

• Adjust the picture tone. (See pages 23 to 24.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Is the sleep timer set? (See page 35.)

• Check the power control settings. (See page 26.)

• The unit's internal temperature has increased.

Remove any objects blocking vent or clean.

• Is connection to other components correct? (See pages 28 to 29.)

• Is correct input signal source selected after connection? (See page 31.)

• Is the correct input selected? (See page 31.)

• Is picture adjustment correct? (See pages 23 to 24.)

• Is “On” selected in “Audio Only”? (See page 34.)

The example of an error

message displayed on a screen

• No broadcast now.

Error code

E202

Possible Solution

• Check the antenna cable. Check that the antenna is correctly

setup.

• When the unit is used in a low temperature space (e.g. room, ofﬁ ce), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature:

4°F to +140°F (

20°C to +60°C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-37SH20U Operation Manual Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info