Bedienungsanleitung Sharp LC-39LE652E (Seite 12 von 64) (Englisch)

525782

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

NOTE

• The value of Frequency and Network ID should

be set to the value specified by the cable provider.

Press

J to continue.

If you have not selected a DVB-S antenna in the

antenna selection, continue with Settings for all types

of reception on page 13.

Select the satellite system.

Specify how you receive which satellite(s) (single

satellite or type of satellite system). Ask your dealer in

this regard.

The normal DVB-S settings are derived from the

selection of the location and do not need to be changed

in most cases.

●

Single satellite

Reception of a single satellite via a connected LNC

(LNB). See page 11 for settings.

●

2 satellites on 22kHz switchbox

Reception of two different satellites with two LNCs

(LNBs) which are connected to the TV set by a 22

kHz switchbox. See page 11 for settings.

●

2 satellites on Toneburst switch

Reception of two different satellites with two LNCs

(LNBs) which are connected to the TV set by a

toneburst switch. See page 11 for settings.

●

Max. 4 satellites on DiSEqC multiswitch

The TV set controls a DiSEqC multiswitch to which

up to four LNCs (LNBs) for different satellites are

connected. See page 11 for settings.

●

DiSEqC one cable communal system

Select setting if the TV set is connected to a DiSEqC

single cable system (according to EN50494). Several

satellite receivers can be connected to one satellite

cable. See page 12 for settings.

●

Other communal installation

Select this setting if the TV set is connected to a

single-cable system (without DiSEqC). Several

satellite receivers can be connected to one satellite

cable. As opposed to a DiSEqC one cable system

there are restrictions in the range of certain reception

frequencies in common single-cable community

systems. See page 13 for settings.

Press

J to continue

Quick guide

If you have not selected DVB-C antenna in the

antenna selection, continue with Setting options for

DVB-S reception below.

The normal DVB-C settings are derived from the

selection of the location and do not need to be changed.

Press ▲/▼/◄/► to change each item to the appropriate

settings:

●

● Network selection

If several networks are available via DVB-C, you

can decide which network you want to receive your

channels from.

●

● Scrambled stations

You can specify if coded stations are to be searched

for in the search/update.

Select yes to save all scrambled stations.

•

These stations can only be received in connection with a CI

module and the appropriate CA Card.

•

If a CI module with a CA Card is already inserted for the station

search, all the stations which this module can descramble are

also saved when no is selected.

●

● Search method

If you select Frequency Search, a search is

performed for all receivable stations. With Network

Search, only the stations which the networks

supply are searched, either for all receivable

networks or only for the particular network specified

under Network ID.

●

● Start Frequency

The DVB stations are only searched for in the

frequency range above the start frequency.

●

● Network ID

Change this setting to register only the specified

network ID.

●

● Accept logical channel number

In various countries, digital stations are transmitted

with a preset channel number per station, known as

"Logical Channel Numbers" (LCN).

If you select yes, these default channel numbers will

be used and the channels will be sorted as per LCN.

8 Supplying power to the antenna.

If you use a DVB-T antenna that requires a supply voltage

and which is not supplied via a power adapter, then select

yes (5V) for the antenna's power supply.

Press J button.

How to align your DVB-T antenna is described on

page 14.

9 Continue with Settings for all types of reception

(See page 13).

Setting options for DVB-C reception

Setting options for DVB-S reception

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-39LE652E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-39LE652E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info