475589
19
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
Resolution
Horizontal
Frequency
Vertical
Frequency
VGA
640 g 480
31,5 kHz 60 Hz
VGA
720 g 400
31,47 kHz 70 Hz
SVGA
800 g 600
37,9 kHz 60 Hz
XGA
1.024 g 768
48,4 kHz 60 Hz
WXGA
1.360 g 768
47,7 kHz 60 Hz
SXGA
1.280 g 1.024
64,0 kHz 60 Hz
SXGA+
1.400 g 1.050
65,3 kHz 60 Hz
UXGA
1.600 g 1.200
75,0 kHz 60 Hz
1080p
1.920 g 1.080
67,5 kHz 60 Hz
PC compatibility chart
NOTE
This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
may result in picture distortions.
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are
registered trademarks of International Business Machines
Corporation.
1
1
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/VGA conversion
cable, etc.
1. Press b to select PC-RGB from Source List,
and then press OK.
2. Press MENU key.
3. Press key to select “Settings” and press OK.
4. Press key to select “Input Settings” and press
OK.
5. Press key to select “PC Settings” and press
OK.
6. Press key to select “Auto Adjustment” and
press OK.
NOTE
When connect a PC and select PC-RGB source, the “Auto
adjustment” is executed automatically.
“Auto adjustment” may fail if the PC image has low
resolution, has unclear (black) edges, or is moved while
executing “Auto adjustment”.
Be sure to connect the PC to the TV and switch it on before
starting “Auto adjustment”.
“Auto adjustment” can be executed only when inputting
analogue signals through the “PC IN” terminal.
Adjusting the PC image
automatically
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as necessary
to change image position using “Auto Adjustment”.
In some cases, however, manual adjustment is needed
to optimise the image.
1. Press b to select PC-RGB from Source List,
and then press OK.
2. Press MENU key.
3. Press key to select “Settings” and press OK.
4. Press key to select “Input Settings” and press
OK.
5. Press key to select “PC Settings” and press
OK.
Item
Horizontal
pos.
Centres the image by moving it to the
left or right.
Vertical
pos.
Centres the image by moving it up or
down.
Phase
Adjusts when characters have low
contrast or when the image fl ickers.
Clock
Adjusts when the image fl ickers with
vertical stripes
Auto
Adjustment
Adjusts automatically the image
Reset
Settings
Return to the original image.
Connecting a PC
NOTE
The “PC Settings” options in the “Settings” menu can be
adjusted only when inputting analogue signals through the
“PC IN” terminal.
Depending of resolution, the vertical/horizontal manual
range can be different.
6. Press / to select the specific adjustment item.
7. Press / to adjust the item to the desired
position.
17
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-40LE540E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sharp LC-40LE540E

Sharp LC-40LE540E Bedienungsanleitung - Holländisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info