654915
9
Zoom out
Zoom in
Vorherige Seite
1/72
Nächste Seite
9
Reset TV - This resets the menus to factory settings.
HDMI CEC* - Allows you to operate devices
connected via HDMI with TV remote control.
Auto standby* - Automatically turn on/
o connected devices via HDMI CEC
Device list* - Allows you to access devices menu and
operate the menu using TV remote control.
HDMI ARC* - Sends audio signal from terrestrial/satellite broadcast
via HDMI to the AV receiver without using any additional audio
cables, this functions is available only on HDMI 2 output.
* - HDMI CEC must be supported by connected device.
LED Status - Allows the user to switch the LED Power indicator light ON
or OFF, when the TV is being operated. (When this option is set to OFF
the LED Power indicator light will flash when the remote control is used)
Version Info - shows version of TV software
Store Mode* - switch ON/OFF shop demonstration mode
* - available only if store mode was selected during  rst time installation
7 Day TV Guide
TV Guide is available in Digital TV mode. It provides information about
forthcoming programmes (where supported by the Digital channel). You
can view the start and end time of all programmes and on all channels for
the next 7 days and set reminders.
1. Press
[TV GUIDE]. The following 7 Day TV Guide will appear.
2. Navigate through the menu using
///.
You can now:
Record selected TV channel and TV show by pressing the RED button.*
Set areminder by pressing GREEN.
View aprevious day by pressing YELLOW.
View the next day by pressing BLUE.
[INFO] shows detailed
information about the selected post
3. Press
[EXIT] to exit the 7 day TV Guide.
* - only for models with recording function
USB mode / Media player
USB mode o ers playback of various di erent types of content that you
have saved on your USB Memory Stick. On switching to USB source the
USB mode menu screen will appear. The content will be divided into Photo,
Music, Movie and Text based on  le type.
1. You can navigate through the menus using the scroll
///buttons. To con rm the item you wish to play/view press
[OK]
button.
2. Select the drive you require. (If your drive only has 1 partition you will
only see 1 item).
3. You can now access the item. Press OK to view.
4. While viewing you may control the item playback modes by using the
remote control buttons or by invoking playback navigation menu and
selecting on-screen buttons
/// and [OK]
NOTE: USB extension cables are not recommended as
they can cause a reduction in picture/audio quality and
stoppages during play back of USB content.
USB Record - Digital mode*
Built into this television is aUSB record facility. This function is available in
Digital mode when used in conjunction with acompatible USB memory
stick or USB Hard drive. The bene ts of this are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV).
One button record, if you decide you want to record the current
programme.
Easy programmable recording from the 7 day TV Guide
Due to the nature of the product, it is necessary to use ahigh speed USB
memory stick (as the TV reads from and writes to the memory stick at the
same time, some memory sticks may not be suitable).
Minimum Speci cation - USB Memory Stick
Read Speed - 20 MB/s(Mega Byte Per Second)
Write Speed - 6 MB/s(Mega Byte Per Second)
Pause Live TV (Time Shift) *
Pausing Live TV is very simple.
Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
Press fast forward to go forward in arecording (i.e. to skip adverts).
Press fast rewind to go back in arecording
(i.e. if you fast forwarded too far).
TIP: When you switch the TV to standby or change channel the Time Shift
memory is wiped. To restart time shift you must press play/pause button.
One Button Record
At any point in time you may decide to record the current channel that you
are watching. To do this you need to press the [REC] button.
TIP: This television contains one TV tuner, therefore it can
only record the channel you are watching or record one
channel while the television is in standby mode.
NOTE: USB record function is only available in Digital TV mode.
Due to copyright laws and illegal copying/recording it is not
possible to record to/from any other input/output source.
* - only for devices with built in PVR function
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

sharp-lc-43cfe5100e

Suche zurücksetzen

  • Bei meinem sharp LC-43CFE5100E kommt oft der Hinweis, dass der programmierte timer die Umschaltung auf Sender xy.. Verlangt. Ich konnte nichts in den Einstellungen finden. Ein zurück setzen auf Werkseinstellungen hat das Problem für eine Woche behoben, dann kam die Meldung wieder. Hat jemand eine Idee? Eingereicht am 18-3-2019 20:21

    Antworten Frage melden
  • im FS Bil d erscheint links oben ein K auf gelben Karo wie bekomm ich das wieder weg? Eingereicht am 28-9-2018 16:49

    Antworten Frage melden
  • Hallo an einen Helfer.
    Ich kann im Senderbereich keinerlei Veränderungen mehr vornehmen. leider hatte ich einmal ein Passwort eingegeben und komplett vergessen. Löschen wie angegeben, funktioniert leider nicht. nun bin ich überfragt.
    Wer kann mir helfen Eingereicht am 24-7-2018 14:21

    Antworten Frage melden
  • Hallo ich habe bei meinem Fernseher (Sharp LC-48CFE4042) links oben in der Ecke in einem gelben Quadrat ein K und darunter ein w und da drunter eine 0. Dazu kommt noch die Anzeige der Model Nummer wie oben benannt. Wie kriege ich das ausgeblendet? Eingereicht am 19-2-2018 14:18

    Antworten Frage melden
  • Wie bekomme ich die anzeige auf dem Bildschirm mit der Nummer LC 43CFE5100
    wieder weg ? Eingereicht am 9-11-2017 18:09

    Antworten Frage melden
  • Habe gelbes K in der ecke wie kriege ich das weg lg marcel antworten Bitte an marcelwilhelm@live.de Eingereicht am 5-10-2017 17:36

    Antworten Frage melden
  • Hallo ich habe bei meinem Fernseher (Sharp LC-43CFE5100) links oben in der Ecke in einem gelben Quadrat ein K und darunter ein w und da drunter eine 0. Dazu kommt noch die Anzeige der Model Nummer wie oben benannt. Wie kriege ich das ausgeblendet? Eingereicht am 17-6-2017 23:36

    Antworten Frage melden
  • FRAGE: Hat der Fernseher (Modell LC-43CFE5100E) einen eingebauten DBVT2 Turner ? Eingereicht am 15-5-2017 19:13

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-43CFE5100E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info