635739
35
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
LC-32CHE6241K
LC-32CFE6241K
LC-40CFE6241K
LC-43CFE6241K
LC-49CFE6241K
LC-55CFE6241K
User manual
Models:
Image for illustration purposes only. Actual product may vary.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd 1User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd 1 20/08/2015 14:03:5620/08/2015 14:03:56
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:2User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:2 20/08/2015 14:03:5720/08/2015 14:03:57
4
Important safety instruction
Please read these instructions. All
the safety and operating instructions
should be read before the appliance
is operated.
Warnings
Television sets which weigh 20kg or more must be
lifted and carried by at least 2 people.
This television does not contain any parts that are
serviceable by the user. In case of a fault, contact
the manufacturer or authorised service department.
Exposing the internal parts inside the TV may
endanger your life. The manufacturers guarantee
does not extend to faults caused by repairs carried
out by unauthorised third parties.
To reduce the risk of fi re, electric shock or damage
to the TV, do not expose it to dust, rain or moisture.
Never expose the TV to dripping or splashing and do
not place objects fi lled with liquids on or near the TV.
Do not connect any external devices (DVD player,
games console etc) when the TV is switched on.
Disconnect both the TV and device from the mains
before connecting. Only switch appliances on when
the connection process is complete.
Do not place the television in a confi ned space and
do not obstruct the ventilation openings at the rear
of the television.
When installing on a wall, ensure the TV is at
least 5cm from the wall for ventilation.
Always ensure that the TV’s ventilation openings
are not covered with items such as newspapers,
table-cloths, curtains, etc.
Dispose of this television and any components
including batteries in an environmentally friendly
manner. If in doubt, please contact your local
authority for details of recycling.
Safety
For your safety, this appliance is fi tted with a
fused 3 pin mains plug. Should the fuse need to be
replaced, ensure that any replacement is of the same
amperage and approved with the BSI mark.
Never try and replace the mains plug unless you have
adequate qualifi cations and are legally authorised to
do so. In the event that a replacement mains cable
is required, contact the manufacturer for a suitable
replacement.
Never use the television if it is damaged in any way.
Always place the television on a fl at level surface
avoiding anywhere which may be subject to
strong vibration.
The ideal distance to watch the television is
approximately fi ve times the length of the diagonal
measurements of the TV screen.
Ensure the television is not placed on top of the
power cable as the weight of the television may
damage the cable and cause a safety hazard.
Never place mobile phones, speakers or any
other device which may cause magnetic or radio
interference, near the television. If interference is
apparent, move the device causing the interference
away from the television.
To disconnect the apparatus from the mains, please
use the mains plug located on the underside/rear of
the TV.
Ensure that the mains plug is always easily accessible.
WARNING: Excessive noise when using
earphones and headphones can cause loss of
hearing.
Maintenance
To clean your TV, wipe with a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth dipped
in a soap and water solution or a weak detergent
solution.
Never use alcohol, paint thinner or benzene to clean
this unit.
Before using a chemically treated cloth, read the
instructions that came with the cloth carefully.
CAUTION: If water or other liquid enters the
television through the display panel surface,
a malfunction may occur.
Packaging
The safest way to transport your item is in the
original box/packaging - please save your packaging
for this.
You will need the original box/packaging in the
event of warranty/service repair or support. We
are unable to carry out warranty/service if you are
unable to package the item correctly.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:4User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:4 20/08/2015 14:03:5720/08/2015 14:03:57
77
CONTENTS
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruSurround is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Manufacturers guarantee information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
What is included in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Attaching / detaching the stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Securing the TV to a wall / wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
TV buttons and Input Source menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15
Connecting the TV to the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
TV menu operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-27
Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18
Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Channel menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lock menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Time menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Network confi guration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Applications menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-27
7 day TV guide and channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
USB record - Freeview / Saorview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-38
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-31
Technical specifi cations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-38
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:7User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:7 20/08/2015 14:03:5720/08/2015 14:03:57
8
What is included in the box
Please save your box/packaging as you will need this in the event of warranty/service repair or support.
We are unable to carry out warranty/service if you are unable to package it correctly. The safest way to
package your item in the event of warranty/service repair is in it’s original box/packaging.
WHAT IS INCLUDED IN THE BOX
1 x User guide
1 x Quick start guide
1 x TV
1 x Remote control and 2 x AAA batteries
User guide
Quick start
guide
1 x RF cable
Accessories
Included with this TV are the following accessories.
1 x Mini composite / AV cable
1 x Mini component / YPbPr cable
1 x Stand installation pack
4 x
1 x L (left)
1 x R (right)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:8User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:8 20/08/2015 14:03:5720/08/2015 14:03:57
99
Attaching/detaching the stand
ATTACHING THE STAND
(fi g.1) Place the TV set on a fl at and
clean surface with the panel facing
downwards to avoid damage, then
x the stand/feet shown. The feet are
marked L (left) and R (right).
(fi g.2) Secure the stand/feet to
the underside of the TV set using
the 4 screws provided.
Attaching the stand/feet
To complete the stand/feet installation you will require a cross head screw driver.
L
R
4 x
3
4
1
2
L
R
1
2
3
(fi g.2) When the stand feet are
installed correctly, the stand/feet
will be angled away from each
other at the front of the TV set.
Detaching the stand
Remove the screws highlighted then remove the stand/feet from the underside of the TV set.
TV panel must be facing downwards.
Screws that are included.
4 x
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:9User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:9 20/08/2015 14:04:0020/08/2015 14:04:00
10
Wall mounting
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling where there
could be any electrical wires, water or gas pipes.
1) Remove the four screws located at the back of the TV set.
2) The wall mount can now be easily attached to the mounting holes, located
on the back of the TV, using the same four screws removed.
For VESA wall mounting information please refer to the Technical
Specifi cation page.
For optimum viewing, if wall mounting the TV higher than eye level, the TV should be tilted downwards
so that the TV’s screen is ‘face on’. See fi g 1 and 2.
Important – If wall mounting this TV, only use the screws already provided in the wall mounting holes
located at the back of the TV, using other screws which are longer could cause irreparable damage to
internal parts.
Securing the TV to a wall/wall mounting
SECURING THE TV TO A WALL
Note - Please ensure that children do not climb on the TV set.
Securing the TV to a wall using anti-tip straps
For maximum security in the home, when using a TV with its stand, anti-tip straps should be fi tted. These
are available from supermarket websites and other websites and are an easy, inexpensive and effective
way of ensuring your TV stays safely upright. Straps are designed to be attached to the rear of the TV and
then tethered to the wall or the furniture the TV is stood on, these are fi tted as follows.
The Royal Society for the Prevention of Accidents is urging people to take care with fl at-screen televisions.
RoSPA stated in 2010 that “Toddlers are particularly at risk of pulling fl at-screen televisions on to
themselves. They are unsteady on their feet and are attracted by colourful television images.”
The risk is increased as televisions become lighter.
A) Using one or both of the top wall-mounting
holes and screws fasten one end of the fastening
cord/s to the TV. (the screws are already supplied in
the wall mounting holes)
B) Secure the other end of the fastening cord/s to
your wall. (you will need screws/fi xings suitable
for your wall type - available separately from most
DIY stores).
fig 1 fig 2
TV
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:10User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:10 20/08/2015 14:04:0120/08/2015 14:04:01
STANDBY - Switch on the TV when in standby or vice versa.
MUTE - Mute the sound or vice versa.
NET+ - Access the Aquos Net application.
DTV - Switch to digital TV source.
USB - Switch to USB source.
YOUTUBE - Access the Youtube App.
NUMBER BUTTONS - 0–9 to select a TV channel directly.
TV GUIDE - Opens the 7 day TV guide (digital TV mode).
- To return to the previous channel viewed.
VOL (+/-) - To increase/decrease the sound level.
PICTURE - Scrolls through picture mode options.
SOUND - Scrolls through sound mode options.
SOURCE - To display the input/source menu.
CH (+/-) - To increase or decrease the channel being watched.
MENU - To display OSD menu.
EXIT - To exit all menus.
- Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
BACK - To go back a previous step.
FAV - To display favourites menu.
INFO - Press once for now/next channel information.
- Press twice for information about the current programme.
SLEEP - Press repeatedly to cycle through the sleep options.
AUDIO - To change the audio language (if available).
SUBTITLE - To switch the dialogue at the bottom of the screen (on/off).
TEXT - To enter/exit Text.
TEXT HOLD - Teletext mode - Holds current page which is
displayed (Analogue TV).
TEXT/ZOOM - Zoom function for Teletext and DVD.
DISPLAY - To switch off the screen when listening to radio.
RECORD - Access the USB record function.
REC LIST - Opens the list of what has been previously recorded.
GOTO - To go to a specifi c chapter.
A-B - Press once to set point, press a second time to return to point.
ANGLE - Select different angle of DVD.
REPEAT - To repeat playback.
1111
Remote control
REMOTE CONTROL
1
4
2
3
- To restart the current chapter
- To advance forward to the next chapter
- To stop the playback/Eject Disc
(To EJECT the disc press/hold the button for 4 seconds)
- To play in fast rewind mode
- To play in fast forward mode
- To play/pause
Key
4
3
2
1
For models with integrated DVD players.
For models with PVR Function.
For models with USB Playback.
During the initial set up of your TV you will need to pair the remote control to the TV.
To pair the remote control to the TV, ensure the TV is in standby mode, press and hold the green
and yellow buttons (highlighted below) on the remote control for a few seconds.
Buttons to use when
pairing the remote
control to the TV.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:11User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:11 20/08/2015 14:04:0120/08/2015 14:04:01
12
Volume up and menu right
Volume down and menu left
Programme/channel up and menu up
Programme/channel down and menu down
Displays menu/OSD
Displays the ‘Input Source’ menu
Standby power On/Off
1
2
3
4
5
6
7
TV BUTTONS AND INPUT SOURCE MENU
1
2
3
4
5
6
7
An example of the ‘Input Source’ menu
(will vary by model)
Note: The shape of the TV buttons may vary by model.
Choosing Mode Input/Source
Use the source menu to switch between
input/connections.
A) Using the buttons on the remote control:
1) Press [SOURCE] - The source menu will appear.
2) Press [\/] or [/\] to select the input you require.
3) Press [OK].
B) Using the buttons on the Television:
1) Press [SOURCE].
2) Scroll up / down using CH+/ CH- buttons to
the input/source you require.
3) Press Vol+ to change input/source to the
one selected.
For further information on input/connections please
view ‘Connections’ pages.
TV Buttons and Input Source Menu
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:12User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:12 20/08/2015 14:04:0120/08/2015 14:04:01
1313
CONNECTIONS
A
C
D
E
F
G
H
I
J
K
L
M
N
B
LAN* Network connection
HDMI 1 HDMI input
HDMI 2 HDMI input (ARC)
VGA PC VGA-PC input
SCART SCART input
RF in RF / TV aerial input
Digital audio Digital optical audio output
HDMI 3 HDMI input
USB x 2 USB port
VGA PC audio in 3.5mm PC audio input
AV in Audio/video input
CI card in Common interface module
YPbPr HD input (Ypbpr)
Earphones Earphone input
A
I
L
B
J
M
N
C
D
E
F
G
H
K
The LAN/Ethernet port is used for Freeview HD services and smart functions.
VGA/PC IN
Digital Audio
Output
EARPHONE
USB
CI CARD IN
VG A/PC (Audio in)
AV IN Y Pb Pr
Connections
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:13User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:13 20/08/2015 14:04:0220/08/2015 14:04:02
14
Connections
CONNECTIONS
Connecting to a device with SCART output
TV source should be set to SCART
Connecting to a device with Composite AV/Video output
TV Source should be set to Composite/AV
Mini
AV in
L (white)
R (red)
Video
(yellow)
Scart
Scart
Connecting to a device with HDMI output
A HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio
with minimal loss of quality.
TV Source should be set to the corresponding HDMI port (HDMI 1, HDMI 2 etc)
Note: Connecting cables are shown for example only and may not be included. Please check ‘What Is
Included In The Box’ page.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:14User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:14 20/08/2015 14:04:0320/08/2015 14:04:03
1515
Connections
CONNECTIONS
Connecting to a device with Component/YPbPr output
If you are supplied with a cable from the device which has red, green, blue, red & white connectors you
must connect via Component (for picture) and by phono cable (for sound).
TV source should be set to Component/YPbPr
Mini
AV in
Mini
YPbPr
Y (green)
PB (blue)
PR (red)
Video (yellow)
is not connected
R (red)
L (white)
Connecting to an external audio device (Amplifi ers, Surround Sound,
Sound Bars etc)
When connecting via the TV’s 3.5mm earphone output, this will disable the TV speakers.
3.5mm
earphone
OPTION 1 for 3.5mm EARPHONE Output
OPTION 2 for Digital Optical Audio Output
Digital
audio
out
(optical)
3.5mm
audio
in
Digital
audio
in
(optical)
Connecting to a device with VGA/PC output (Laptop or Desktop Computer)
TV source should be set to VGA/PC
VGA/PC
in
VGA/PC
out
VGA/PC
(audio
in)
Audio
out
Connecting an Ethernet/Network cable
The LAN/Ethernet port is used for Freeview HD services and smart functions.
Ethernet
port
Ethernet
port
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:15User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:15 20/08/2015 14:04:0320/08/2015 14:04:03
16
Connecting the TV to the Internet
CONNECTING THE TV TO THE INTERNET
Connecting your TV with an Ethernet/LAN cable:
1) Plug in your Ethernet cable into the RJ45 (Ethernet) socket located at the rear of the television.
Ethernet
port
2) Press Menu on the remote control. (fi g.1)
3) Scroll through the menu and select and enter the ‘Network’ menu.
4) In ‘Network Confi gurations’, select ‘Cable’.(fi g.2).
5) Set will automatically confi gure itself.
6) Exit the menu by pressing ‘EXIT’ on the remote control.
Connecting your TV with a wireless connection
1) Press Menu on the remote control (fi g.1).
2) Scroll through the menu and select and enter the ‘Network’ menu.
3) in the ‘Network’ menu, example below, scroll down and select ‘Wi-fi Confi g’ (fi g.2).
4) Within the ‘Wi-Fi confi g’ options, highlight and select ‘Wi-Fi Auto Search’.
5) The TV will then automatically search for networks.
6) Select the preferred type of network connection then enter the network password.
7) The TV will then establish a connection.
Note: An icon will appear in the top right hand side of the ‘Application’ menu to show you if the TV is
connected to the internet.
When you fi rst power on your new SMART TV there will be an option to follow various on-screen set up
instructions. These instructions will enable you to connect to the internet via your home network.
You can connect to your home network either wirelessly or with an Ethernet cable.
If you decide not to follow the initial set up instructions and need to connect at a later date please follow
these simple steps below:
g.1
g.2
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:16User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:16 20/08/2015 14:04:0420/08/2015 14:04:04
1717
TV Menu Operation
PICTURE MENU
Picture Mode - Choose from the following presets:
Dynamic Recommended settings for fast moving pictures
Standard Standard settings
Mild Set to be lighter in colour and less bright
Personal Lets you manually alter all the settings
Economy Power saving mode which reduces the energy used by up to 25% (by reducing the
power to the LED/LCD panel). In Economy mode, the TV will switch itself to
Standby mode after 3-5 hours in the event that the TV buttons or remote control
buttons are not pressed (change the picture mode to another setting to de-activate
this function)
You can make the following adjustments in
Personal mode:
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the picture
(only available for NTSC input signal).
• Sharpness - Increase or decrease the sharpness of the picture.
Backlight adjusting - Adjust the screen’s brightness by increasing/decreasing the panel’s backlighting.
To access this menu, press [MENU] button on the remote control.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Colour Temperature Choose from the following presets:
Normal Default settings
Warm Increases red within the picture
Cold Increases blue within the picture
Personal Lets you manually alter the settings
Red - Adjust red tone of the picture.
Green - Adjust green tone of the picture.
Blue - Adjust blue tone of the picture.
Gamma - Adjust the tones between the bright and dark parts of the picture. Choose one of the
following presets: low, middle and high.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:17User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:17 20/08/2015 14:04:0420/08/2015 14:04:04
18
TV Menu Operation
PICTURE MENU
Auto
Automatically displays the best picture format so the picture is in the correct position, black lines maybe
viewable at the top/bottom and/or sides.
Zoom1 and Zoom 216:9
The picture
is the correct
proportion but
zoomed in to
ll the screen
Full Screen
4:3
Displays a picture in
the full screen size
without overscan.
16:9 signal will be
displayed in original
proportion. Other
picture format will
be stretched to fill
the screen
Displays the 4:3
picture in its
original size.
Side bars are
shown to fi ll the
16:9 screen
Fills the screen with
a regular 16:9 signal
and 4:3 picture
format will be
stretched to fi ll
the screen
Aspect Ratio - Within the UK the picture format varies depending on the channel/broadcast. There are a
number of different options to best meet your needs. Choose from the following settings:
Noise Reduction - Allows you to switch noise reduction ON or OFF. Choose one of the following presets:
low, middle, high and Off.
MPEG Noise Reduction - Allows you to change the MPEG noise reduction settting. This feature improves
the quality of pictures by reducing the picture noise without compromising the picture resolution. Choose
one of the following presets: low, middle, high and Off.
Active Contrast - Automatically optimises the ‘backlight’ and ‘contrast’ of the picture according to the
brightness of the screen. Choose one of the following presets: low, middle, high and Off.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:18User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:18 20/08/2015 14:04:0420/08/2015 14:04:04
1919
TV Menu Operation
SOUND MENU
Sound Mode - Choose from the following presets
Standard Default settings
Music Emphasises music over voices
Movie Provides live and full sound for movies
Sports Emphasises sound for sports
Personal Selects your personal sound settings. Any adjustments made
automatically sets the sound mode to
Personal.
Off To turn off Digital Output
Auto Selects the best settings automatically
PCM Select this option if you are connecting to a Stereo Hi-fi via optical cable (Pulse-code
modulation (PCM) is a digital representation of an analogue signal)
Digital Output - This is the digital optical audio output. Choose from the following options:
EQ - Adjust the audio level of separate frequencies via the band equaliser.
Balance - To switch the sound between the left and right speakers.
Auto Volume Level (AVL) - When ‘on’ is selected, the volume will attempt to stay at a constant level
regardless of TV programme and advertisements.
DTS TruSurround - Choose from the following presets
Audio Description - This allows the user to switch Audio Description ON or OFF. (Audio Description is
a service available on certain programmes. It provides a description of what is happening during the
selected programme for a person who is visually impaired).
AD Volume - This allows the user to increase and decrease the AD (Audio Description) volume level.
Audio Delay - Enables the user to adjust setting to sync picture and audio.
SPDIF Delay - Enables the user to adjust sound setting to sync picture and audio for external speakers
connected via digital audio output.
Off Off
On On - TruSurround™ creates an immersive, feature-rich surround
sound experience from two speakers, complete with rich bass, high frequency detail
and clear dialog
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:19User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:19 20/08/2015 14:04:0420/08/2015 14:04:04
20
TV Menu Operation
CHANNEL MENU
Tip: If you do not press any buttons for 30 seconds, the menu will automatically exit. You can change
the length of time before the menu exits automatically - see ‘OSD Timer’ in the Time Menu
Signal Information - Allows you to view signal frequency, signal quality and signal strength.
CI Information - Pay per view services require a “smartcard” to be inserted into the TV. If you subscribe to
a pay per view service the provider will issue you with a ‘CAM’ and a “smartcard”. The CAM can then be
inserted into the COMMON INTERFACE PORT (CI Card In).
Recorded List - Shows a list of recorded TV programmes.
Schedule List - Lists your programme reminders.
OAD (Software Update) - Switch on/off OAD (over air download) software updates.
Auto Tuning - Allows you to retune the television for all digital channels, digital radio stations and
analogue devices.
Analogue Manual Tuning - Allows you to manually tune your analogue signal.
Freeview/Saorview Manual Tuning* - Allows you to manually tune your digital signal.
Channel Edit - Allows you to delete, move, skip and select favourite channels.
Important: To receive Freeview/Saorview channels, in particular HD
channels, you will need a Digital TV aerial and be in a good Freeview/
Saorview coverage area. You can check the coverage for your area at
www.freeview.co.uk or www.saorview.ie
Please note that any Freeview HD channels found during tuning will
be placed in channel positions above 100.
For example, 101 (BBC1 HD) 102 (BBC2 HD) etc.
*Freeview channels are only available in the UK, Saorview channels
are only available in the ROI.
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:20User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:20 20/08/2015 14:04:0420/08/2015 14:04:04
2121
TV Menu Operation
LOCK MENU
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
System/Hotel Lock - Allows you to lock or unlock the menu. You will be asked to enter a 4 digit password
Use the
button to quit the password input or use the button to clear. Default password is 0000.
Change Password - Allows you to change the password.
Channel Lock - Allows you to lock certain channels manually.
Parental Guidance - Allows you to set the rating to block certain content based on age information.
TV Button Lock - Allows you to lock the buttons on the side of the TV set.
Default Source - Allows the user to set the default source. The default source is the source the TV starts on
when fi rst switched on.
Default Channel - Allows the user to set a channel as the default channel on the Digital source. The
default channel is the channel the TV starts on when fi rst switched on.
Max Volume - Allows you to adjust and set the maximum volume.
Source Lock - Allows you to lock the source menu.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:21User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:21 20/08/2015 14:04:0420/08/2015 14:04:04
2323
NETWORK CONFIGURATION
The Network connection enables you to update the TV software and a number of Smart TV functions.
For the network confi guration to work the TV will need to be connected to your home network via an
ethernet cable, with these requirements in place the TV will connect to the network automatically.
Network Confi g - Allows you to select either Cable or Wifi connection.
WIFI / IP Confi g - Allows you to access LAN network connection settings. Choose from the following options:
Auto Will automatically connect the TV to your home network(this is the default setting
and is highly recommended)
Manual Allows you to manually change the IP, Netmask, Gateway and DNS information.
WIFI Confi g - If WIFI is selected during fi rst time installation process.
Wi-Fi Confi guratrion Wireless network connection settings
Wi-Fi Auto Search Automatically searches for available wireless networks. Select the desired
Wi–Fi network and then enter the network password (if network is password
protected). Once the password is accepted, you will not be asked for it again.
Network Info - Allows you to view Information about network settings.
Network Test - Allows you to test the network connection.
Network Confi guration
To access this menu, press [MENU] button on the remote control and scroll right.
To select a sub menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:23User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:23 20/08/2015 14:04:0520/08/2015 14:04:05
28
7 DAY TV GUIDE
TV Guide is available in Saorview/Freeview TV mode. It provides information about forthcoming
programmes (where supported by the Saorview/Freeview channel). You can view the start and end
time of all programmes and on all channels for the next 7 days and set reminders.
1) Press [TV GUIDE] on the remote control, the following 7 Day TV Guide will appear.
2) Navigate through the menu using
.
You can now:
Record a programme by pressing RED (USB device must be connected)
Set a reminder by pressing GREEN
View a previous day by pressing YELLOW
View the next day by pressing BLUE
3) Press [EXIT] to exit the 7 day TV Guide
7 Day TV Guide and Channel List
7 Day TV GUIDE
11 Dec 2014 12: 58
1 BBC ONE Oxford
CHANNEL
1 BBC ONE Oxford
2 BBC TWO
3 ITV
4 Channel 4
5 Channel 5
6 ITV2
7 BBC THREE
9 BBC FOUR
12:15 - 13:00 11 Dec 2014
Norfolk: Tim wonnacott and the teams are in Norfolk in search of great buys to take to auction.
Expertise comes from Catherine Southon and Jonathan Pratt, and Tim visits Ham House.
Lifestyle
12:00
Bargain Hunt
Daily Politics The Blue Planet
Let’s Do Christmas with Gino and Mel
Come Dine with Me
Coronation Street
Three Wise Women
You’ve Been Framed! Royal...
This is BBC Three
This is BBC Four
Come Dine with Me
Come Dine...
ITV News & Weather
Jame...
5..
Record
Move
Remind
Info
Prev Day
EXIT
Next Day
OK
OK
Home and Away
BBC News at One South...
Doctors
13:00 13:30Now
Info. Exit.
Channel List
To view the channel list, please ensure that the TV is set to either the analogue or digital source and
no menus or TV notifi cations are displayed.
1) Press [OK] on the remote control and the
channel list menu will appear.
2) Press LEFT / RIGHT arrow to fi lter desired channel types (Digital TV,
HD channels, Radio, Data, All).
3) Scroll through the channel list by using buttons then
press [OK] to view the channel that is currently highlighted.
4) Press [EXIT] to exit the channel list.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:28User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:28 20/08/2015 14:04:0520/08/2015 14:04:05
2929
USB Record - Freeview/Saorview
USB RECORD  FREEVIEW/SAORVIEW MODE
Built into this television is a USB record facility. This function is available in Freeview/Saorview mode
when used in conjunction with a compatible USB memory stick or USB hard drive. The benefi ts of this
are as follows:
Pause live TV and then playback, fast forward and rewind (up to live TV)
One button record, if you decide you want to record the current programme
Easy programmable recording from the 7 day TV Guide
Record TV and watch/listen back on your computer/laptop
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV
reads from and writes to the memory stick at the same time, some memory sticks may not be suitable)
You can purchase high speed memory sticks from some computer stores, alternatively, we have
a selection of tested and compatible memory sticks available to purchase directly from the
helpline/website.
Minimum specifi cation - USB Memory Stick
Read Speed 80 MB/s (Mega Byte Per Second)
Write Speed 40 MB/s (Mega Byte Per Second)
If you wish to use a USB portable hard drive larger than 32GB, please refer to the FAQ section at the rear
of this user guide.
Tip: When you switch the TV to standby or change channel the time shift memory is wiped. To restart
time shift you must press play/pause button.
Pause live TV (time shift)
Pausing Live TV is very simple.
- Press the play/pause button and the television will pause and the live
content will be recorded. To resume watching press play/pause again.
- Press fast forward to go forward in a recording (i.e. to skip adverts)
- Press fast rewind to go back in a recording (i.e. if you fast forwarded too
far)
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or
record one channel while the television is in standby mode.
Note: USB record function is only available in Freeview/Saorview TV mode. Due to copyright laws and
illegal copying/recording it is not possible to record to/from any other input/output source.
One button record
At any point in time you may decide to record the current channel that you are watching. To do this you
need to press the red button highlighted below.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:29User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:29 20/08/2015 14:04:0520/08/2015 14:04:05
30
General I would like to have louder
sound by connecting additional
speakers. For TV models with
digital optical audio output.
1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available
separately) to connect to an amplifi er/surround sound system. Please note this
will deactivate the TV’s built in speakers.
2) Connect a digital optical audio cable from the TV’s digital optical audio output
to your amplifi er/surround systems digital optical audio input.
General Why are some options in the menu
unavailable and greyed out.
Some options are only available in certain sources, i.e. HDMI. They are
unavailable in the other sources where they have no a ect.
General Can I stop my TV automatically
turning o after 4hrs?
Yes, in the Time menu settings, scroll down to Auto standby and select OFF.
TV I have tuned in Digital TV but I
am not receiving any or all of the
channels and/or the channels I
receive are breaking up.
1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or
www.saorview.ie
2) Check you are using an aerial that is able to receive a good digital signal. In most cases,
you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent
digital coverage, you may be able to use a loft type aerial but it is highly likely that you will
also need to connect a booster between the back of the TV and the TV aerial wall socket.
Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/
indoor type aerial.
TV I have re-tuned my television but
when I switch it o it is not storing
the channels.
If the TV does not save the channels when you power it o , it’s likely the channel database
has become corrupt.
1) Turn o the TV.
2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.
3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst
time installation menu.
4) Press OK (let the TV run the full tuning process).
5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back on
again.
6) Repeat steps 3 & 4.
VCR/DVD
Recorder
I have connected the TV to my VCR
or DVD Recorder via SCART but it is
not recording.
In addition to connecting via SCART, you should connect the aerial cable from the wall
socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to
the TV.
Game Consoles I have connected my Playstation/
Xbox to the TV via HDMI, but I am
not receiving any pictures or sound
on my TV
1) Ensure the TVs source is set to HDMI.
2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox
instruction manual.
Game Consoles I have connected my Playstation/
Xbox to the TV via Component
cables (red, green & blue) but I am
not receiving any sound.
Component cables only provide HD pictures. For the sound you will need to connect the
red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini
AV input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.
System Lock I have changed the password
on the television and now
forgotten it.
There is a master password of 4711, to gain access to the TV menu and reset the
normal password.
USB Mode I have inserted a USB Memory Key,
but the TV does not recognise it.
Ensure the USB Memory Key is formatted to type FAT32.
USB Mode Using a USB portable hard drive /
larger than 32GB.
If you wish to use a portable hard drive larger than 32GB, please note that it must be
formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista
computers are only capable of formatting up to 32GB, therefore, you will need a software
programme/utility to format larger hard drives.
Please refer to the website, www.umc-uk.co.uk, for more information.
USB Record I cannot change the channel, access
the menu or use the red button.
During time shift you cannot change the channel, access the menu or use the red button.
USB Record When using the USB to record the
picture breaks up or experience
loss of sound.
Check the USB memory stick meets the minimum read speed requirements. Standard
de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a write
Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s
(Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks
should normally ne used where possible.
FREQUENTLY ASKED QUESTIONS
General Information
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:30User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:30 20/08/2015 14:04:0620/08/2015 14:04:06
3131
FREQUENTLY ASKED QUESTIONS
General Information
Freeview HD I cannot access all Freeview
channels.
Some data channels for Freeview can only be obtained when the TV ‘s ethernet port is
connected to your router.
Freeview HD I cannot  nd the Freeview HD
channels.
Freeview HD channels found during tuning will be placed in channel positions above 100.
For example, 101 (BBC1 HD), 102 (BBC2 HD) etc.
Smart I cannot access Smart apps on my
Sharp Smart TV.
Check your TV is connected to the internet and there is suitable signal strength.
You can carry out a Network Test as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Network Test’.
3) This will show the status of the internet connection.
If you have no internet connection you must re-connect your TV as follows:
1) Press Menu on the remote control.
2) Select ‘Network’ Menu then ‘Wi- con g’.
3) Then Wi Auto Search’.
4) The TV will then automatically search for Networks.
5) Select the desired network then enter the Network password.
6) The TV will then connect.
Note: An icon will appear in the top right hand side of the Application page to show you if
the TV is connected to the internet.
Smart I cannot access content through the
Media Server settings
Check your TV is connected to your local network and there is suitable signal strength.
Check the server devices you are trying to connect with are also on the Network and are set
to share content.
Smart I cannot access content through the
Wireless Connection settings
Ensure the device you are trying to mirror onto the TV is correctly paired with the TV.
Check the settings on the device, move your device closer to the TV set, check the user
guide of the device to ensure it is compatible with this function.
Smart While using Media Server, access is
not possible or connection is slow
If the folder you are attempting to view contains a large amount of  les, it may take a little
while to load, this is normal, content may be blocked on the host PC. Recon gure the host
PC to allow external access.
Note: Host may not be connected to your network.
Smart I cannot access Facebook or Twitter Ensure that you have an active account and that your network is not blocking access to
these sites.
Smart The YouTube app does not work
and/or is erratic
Ensure that your network is not blocking access to YouTube and the speed of your internet
connection is fast enough for viewing YouTube content.
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:31User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:31 20/08/2015 14:04:0620/08/2015 14:04:06
32
General Information
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-32CHE6241K
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On-mode power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption
n/a
Screen resolution 1366 (H) x 768 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
728W x 461H x 168D
Net weight (Kgs) 4.5
Wall Mounting VESA 400 x 200 (mm)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:32User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:32 20/08/2015 14:04:0620/08/2015 14:04:06
3333
General Information
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-32CFE6241K
Energy e ciency class A+
Visible screen size (diagonal) 81 cm / 32 inches
On-mode power consumption 31.0 W
Annual energy consumption *1 45 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
31/45/70 (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
728W x 461H x 168D
Net weight (Kgs) 4.5
Wall Mounting VESA 400 x 200 (mm)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:33User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:33 20/08/2015 14:04:0620/08/2015 14:04:06
34
General Information
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-40CFE6241K
Energy e ciency class A+
Visible screen size (diagonal) 100 cm / 40 inches
On-mode power consumption 45.0 W
Annual energy consumption *1 66 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
45/65/80W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
917W x 569H x 185D
Net weight (Kgs) 7.8
Wall Mounting VESA 400 x 200 (mm)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:34User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:34 20/08/2015 14:04:0620/08/2015 14:04:06
3535
General Information
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-43CFE6241K
Energy e ciency class A+
Visible screen size (diagonal) 109 cm / 43 inches
On-mode power consumption 41.0 W
Annual energy consumption *1 60 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet),
1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
41/50/70W(home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
966W x 595H x 185D
Net weight (Kgs) 8
Wall Mounting VESA 400 x 200 (mm)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:35User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:35 20/08/2015 14:04:0620/08/2015 14:04:06
36
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-49CFE6241K
Energy e ciency class A+
Visible screen size (diagonal) 123 cm / 49 inches
On-mode power consumption 67.0 W
Annual energy consumption *1 98 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional technical information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
67/95/110W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
1099W x 668H x 232D
Net weight (Kgs) 11.4
Wall Mounting VESA 600 x 300 (mm)
General Information
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:36User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:36 20/08/2015 14:04:0620/08/2015 14:04:06
3737
General Information
TECHNICAL SPECIFICATION
Trademark
Sharp
Model ID LC-55CFE6241K
Energy e ciency class A+
Visible screen size (diagonal) 139 cm / 55 inches
On-mode power consumption 85.0 W
Annual energy consumption *1 124 kWh
Standby power consumption *2 <0.50 W
O mode power consumption n/a
Screen resolution 1920 (H) x 1080 (V)
*1: Energy consumption XYZ kWh per year, based on the power consumption of the television
operating 4 hours per day for 365 days. The actual energy consumption will depend on how the
television is used.
*2: When the TV is turned o with the remote control/standby button and no function is active.
Product  che
Additional Technical Information
RF 75 ohm Antenna / Analog / DVB
Inputs 3 x HDMI, 1 x SCART, 1 x VGA/PC, 2 x USB,
1 x RJ45 (Ethernet), 1 x 3.5mm jack for PC audio input,
1 x Mini Component/YPbPr,
1 x Mini Composite/Video & L/R Audio shared for
Composite/Video & Component/YPbPr
Sound Outputs 1 x 3.5mm Headphone/Audio out, 1 x Digital Optical
Audio Out
Speaker / Ampli er Watts (RMS) 2 x 10 / 2 x 8
Voltage and power consumption AC 220V ~ 240V; 50/60Hz
85/110/150W (home mode/standard/max)
(<0.5W in Standby)
Dimensions including stand (mm)
1238W x 751H x 232D
Net weight (Kgs) 14.6
Wall Mounting VESA 600 x 300 (mm)
User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:37User Guide - SHA-MAN-0028 - SmartTV - 62 series.indd Sec1:37 20/08/2015 14:04:0620/08/2015 14:04:06
35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp LC-43CFE6241K wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info