Bedienungsanleitung Sharp LC-43CFG6242E (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

654830

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite



What is included in the box

Supply of this TV includes following parts:

• 1x TV • 1x RF cable

• 1x Remote control • 1x TV stand installation packet

• 2x AAA batteries • 1x User guide

• 1x mini component adapter

cable

• 1x mini composite adapter

cable



Attaching the Stand

Please follow the instructions on last page of this user manual.



Getting started - initial set up

1. Using the RF cable supplied, connect the TV to the TV Aerial wall

socket.

2. For connecting to the Internet with a wired connection connect a

Cat 5/Ethernet cable (not included) from the TV to your broadband

modem/router.

3. Insert the batteries supplied into the Remote control.

4. You will be now welcomed with the First Time Installation screen. If

it does not appear, press the standby button on the TV set once, this

will prompt the ‘pairing menu’ to appear. Scroll through and highlight

‘Pair your remote’ by pressing the CH+/CH- TV button (scroll up/down

function in the menu) then press the TV set’s standby button (OK

function in the menu) to con rm your selection. Please press and

hold the blue and yellow buttons for a few seconds on the remote

control, until white LED on TV front blinked  ve times. Press

[MENU] then 8-8-8-8 and the First Time Installation screen will appear.

If you wish to make changes to any of the default settings, use the

scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]

button.

5. Please set desired settings in First Time Installation screen.

STEP 1 - Set the TV Menu language.

STEP 2 - set your country

STEP 3 - Set type of network connection. If you wish to skip this step

and connect TV to network later, please choose Skip Network Setting

STEP 4 - Select the location of TV. For home use, please select Home.

For shop demonstration mode, set Store.

STEP 5 - choose if your TV has stand, or if it is mounted on the wall. TV

will set optimal audio settings for selected option.

STEP 6 - choose input source which you want to use. If you have

connected RF cable directly to TV, choose DTV. If you have satellite

directly connected to your TV, choose DVB-S*. In case you are using

set-top-box, please pick correct input to which it is connected.

6. If you selected in last step DTV or DVB-S2, you will be asked if you

want to tune channels. If you choose “No”, you can tune channels later

from SETTINGS/CHANNEL menu. If you choose “Yes”, tuning menu

will appear.

Digital TV (DTV) tuning: In DVB Antenna, please choose which type

of signal you have. Terrestrial (DVB-T) or Cable (DVB-C). Then enter

Auto tuning and set your desired settings. Again choose Auto tuning

to start tuning of channels.

Satellite (DVB-S2) tuning*: Enter Auto Tuning and enter Satellite.

Here you can choose between the various satellites. Select satellite

which you wish to tune by pressing OK button on remote control.

Then return to previous menu by pressing BACK button on your

remote control and choose Auto tuning to start tuning of channels.

NOTE: To shorten tuning time of satellite channels, some countries

have preinstalled channel list for most popular satellite in that region.

If this is the case for your selected country, you will be asked if you

wish to load preinstalled channel list. If you choose “Yes”, satellite

channel list will be imported to your TV within few seconds.

TIP: If you are missing channels, the reason for this is likely to be signal

strength, you should consider connecting signal booster and re-tuning the TV.

* - Available only for TVs with DVB-S tuner



Remote control

Radio controlled remote control - No more aiming in the TV direction!

Refer to remote control picture on the second page of this user

manual.

STANDBY – Switch on TV when in standby or vice versa.

2. NETFLIX* – Displays NETFLIX menu.

MUTE – Mute the sound or vice versa.

4. 0 – 9 – to select aTV channel directly.

5. YouTube – Displays YouTube application.

6. NET+ – Displays AQUOS NET+ menu.

7. SOURCE – To display the input/source menu.

8. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).

– To return to the previous channel viewed.

10. DTV – Switch to digital TV source.

11. VOL ▲/▼ – To increase/decrease the sound level.

12. FAV – To display favourites menu.

13. INFO – Press once for now/next channel information. Press twice for

programme information about current programme.

14. CH ▲/▼ – To increase or decrease the channel being watched.

15. SUBTITLE – To switch the dialogue at the bottom of the screen (on/

o ).

16. TELETEXT – Teletext mode - To enter Teletext

17. MENU – To display OSD menu.

18. BACK – Back to previous menu.

19. EXIT – To exit all menus.

20. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus

and adjust the system settings to your preference. Press▲to change

picture mode during watching TV. Press▼to change sound mode

during watching TV.

21.

– To play in fast rewind mode.

22.

– To play in fast forward mode.

23.

– To play/pause

24. Rec

– PVR Record

25.

– To restart the current chapter

26.

– To advance forward to the next chapter

27.

– To stop the playback

28. Rec List

– Opens the list of recordings.

29. COLOUR BUTTONS – Additional teletext and OSD functions

- available only with PVR function

* - Net ix is only available on selected models

Sharp LC-43CFG6242E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info