Bedienungsanleitung Sharp lc 46 hd1e (Seite 17 von 64) (Deutsch, Englisch, Französisch, Italienisch)

141478

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Connection wizard

The integrated Connection wizard shows you which

terminal you should connect your equipment to.

Connect the equipment according to the diagram and

follow the messages one after the other.

NOTE

• New devices should not be connected until they have been

registered in the connection wizard.

Press MENU and the TV menu screen displays.

Press c/d to select “Connections”, and then

press b to move down.

Press a/b to select “AV setup”, and then press

OK.

• The connection wizard screen displays.

Press OK. The screen shows a default screen,

which may differ from the actual connection.

Press OK to proceed.

Default screen

Connection wizard

Now the TV set assumes that you have connected the following equipment:

EXT4 EXT1 EXT2 EXT3 EXT5 EXT6

AV setup

Connecting external devices

The AV equipment selection screen opens.

Select device(s) to connect with a/b, and then

press YELLOW to mark. A marked device is

indicated with ✔. For example, if connecting

DVD recorder with HDMI terminal to the TV,

select “HDMI/DVI” and then press YELLOW to

same way.

Connection wizard

Specify all new AV devices to be connected and all connection changes to the existing

devices here.

AV setup -> AV equipment selection

Video recorder

DVD player

DVD recorder

Satellite receiver

SetTopBox/dBox

Decoder

Camcorder/camera

Other device(s) to EXT1/2/4

Device to EXT3

Device to EXT5

Device to EXT6

DVD

DVD •

VCR

SAT

STB

Decoder

Camera

COMP.IN

HDMI/DVI

Next, the connection diagram shows how to

connect the new or preset devices to the rear

terminals. Press OK to proceed.

• If you specify a decoder for connection, you will be

directed to “Select decoder station(s)” submenu.

Specify the signal type for the terminal. If you

are not sure, select the automatic setting.

Follow the instructions on the screen for the rest

of the process.

Items Explanation

Connections

and signal

The signal type of the devices that can be

connected can vary greatly. If you are not sure,

leave the setting for “Signal” on “Automatic

CVBS/YC” (e.g. for DVD Player/Recorder) or

“Autom.-VHS/SVHS” (e.g. VCR), otherwise select

the right signal type.

Immediate

playback

If the picture from a connected device is to be

displayed immediately on the TV set during

playback, select “yes”. A switching voltage is

allowed so that you do not have to switch over

manually to see the picture of the connected

device. (See the operating manual for the

connected reproduction device.)

When playing from AV Link devices, the picture is

always displayed immediately, regardless of the

setting.

Assign digital

audio input

Select the AV socket to which the device of

which you want to hear the digital sound is

connected. Connect the digital output of the

external device to the digital input of the TV set.

(Page 22) If a device with digital audio is not

connected then select “no”.

LC-52HD1E-gb.indd 15LC-52HD1E-gb.indd 15 2008/03/24 15:00:552008/03/24 15:00:55

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp lc 46 hd1e Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp lc 46 hd1e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info