Bedienungsanleitung Sharp lc 46 hd1e (Seite 24 von 64) (Deutsch, Englisch, Französisch, Italienisch)

141478

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Using AV Link function

This TV incorporates four typical AV Link functions

for smooth connections between the TV and other

audiovisual equipment.

One Touch Play

While the TV is in standby mode, it automatically turns

on and plays back the image from the audiovisual

source (e.g. VCR, DVD).

TV Standby

When the TV enters standby mode, the connected

audiovisual equipment (e.g. VCR, DVD) enters standby

mode as well.

WYSIWYR (What You See Is What You Record)

When the remote control unit of the connected VCR

has the WYSIWYR button, you can automatically start

recording by pressing the WYSIWYR button.

Preset Download

Automatically transfers the channel preset information

from the tuner on the TV to the one on the connected

audiovisual equipment (e.g. VCR) via the EXT 2

terminal.

NOTE

• Refer to operation manuals of each external equipment for

the details.

• The use of the AV Link function is only possible if the

TV-set has enforced a complete auto installation with

the connected audiovisual equipment (Page 10, initial

installation wizard).

The availability of the AV Link function depends on

the audiovisual equipment used. Depending on the

manufacturer and type of equipment used, it is possible

that the described functions may be completely or partially

unusable.

Connecting external devices

Recording via the AQUOS Recorder EPG

(only for recorder)

You can call up the CEC-compatible recorder’s EPG

and preset timer recordings using the TV’s remote

control.

Open the remote control’s flip cover.

Press OPTION.

• The AQUOS LINK menu displays.

Press a/b to select “AQUOS Recorder EPG”,

and then press OK.

• The external input source switches and the recorder’s

EPG is displayed.

Select the programme to record.

• Refer to the operation manual of the recorder for

details.

NOTE

• HDMI audio signals may not be output from the AUDIO

OUT L-R.

Using TV speakers as centre speakers

Connect as shown if using the TV speakers as a centre

speaker. In this case, make a connection between the

centre output of the amplifier and the centre input of

the TV (AUDIO IN CENTRE) with a cinch cable.

Speaker/amplifier connection

Connect an amplifier with external speakers as shown

below.

Connecting a digital amplifier

NOTE

• HDMI audio signals are not output from DIGITAL AUDIO

(OUT).

Connecting an analogue amplifier

After connecting, go to “TV menu >

Connections > Sound components > HiFi/AV

amplifier.”

When you select “Surround amplifier” for “Type

of amplifier”, make sure to select “yes” for the

item “TV loudsp. as centre speaker”.

ATTENTION

Do not use the centre speaker connection of the

amplifier, use the centre pre-amp output instead!

AUDIO OUT L-R

Analogue amplifier

Digital amplifier

DIGITAL AUDIO (OUT)

Digital amplifier

PREOUT

(C)

AUDIO IN

(CENTRE)

LC-52HD1E-gb.indd 22LC-52HD1E-gb.indd 22 2008/03/24 15:01:032008/03/24 15:01:03

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp lc 46 hd1e Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp lc 46 hd1e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info