141478
31
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
Watching DVB broadcasts
Software update
TV base software and DVB software
To ensure that your TV set is always up to date, from
time to time SHARP will make updated TV base
software and DVB software versions available. These
updates are broadcast via satellite (only via ASTRA1).
This function is not available in some countries.
Automatic search for new software via satellite
The set automatically determines whether a new
software version is available via satellite during the night
when the EPG data are updated. However the TV set
must remain in standby mode for this (do not switch off
the set with the power switch).
If a new software version has been found, the set
informs you with an on-screen message the next time
it is switched on (see right column – “Loading new
software”).
Manual search for new software via satellite
If it is not automatically displayed that a new software is
available when switching on the set, you can also run a
manual search.
The system first checks whether a software update is
available via satellite.
Press MENU and the TV menu screen displays.
Press c/d to select “Setup”, and then press b
to move down.
Press c/d to select “Miscellaneous”, and then
press b to move down.
Press c/d to select “Software update”, and
then press OK.
The software versions currently loaded in the set are
listed.
Software update -> Software type
TV base software
DVB software
Press a/b to select the desired option, and
then press OK to start the search.
If new versions are available then a subsequent
screen message will be displayed.
1
2
3
4
5
Loading new software
The following will appear if a new software is found via
the search.
Software update -> Update options
Load new software now
Load new software after switch off to standby
Keep current software
Proceed to the next steps by following the
screen prompts.
A bar is displayed to inform you of the progress of
the load process. During the loading process do not
switch off your device via the power switch! This may
last up to 20 minutes. You will be informed when it is
finished.
At the end of loading:
Turn off the TV set off with the power switch,
unplug the AC cord, and turn it on again.
If a new software has not been updated via satellite,
you will be reminded of this several times after
switching on the set.
6
7
29
LC-52HD1E-gb.indd 29LC-52HD1E-gb.indd 29 2008/03/24 15:01:182008/03/24 15:01:18
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Sharp lc 46 hd1e wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Sharp lc 46 hd1e

Sharp lc 46 hd1e Bedienungsanleitung - Holländisch, Portugiesisch, Spanisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info