Bedienungsanleitung Sharp LC-46LE730E (Seite 34 von 48) (Englisch)

475457

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Connected TV

Use the SHARP (AN-WUD630) USB adapter (sold

separately) with the TV.

● Wireless connection overview



PC (Home Media Server)

 Wireless LAN router/access point



Wireless

AN-WUD630

LAN USB adapter (sold separately)

 Network (Internet)

NOTE

• When using the SHARP wireless LAN adapter (sold

separately), try to provide as much free space around the

device for best performance.

• Make sure the firewalls in your network allows access to the

TV wireless connection.

• Operations cannot be guaranteed when used with access

points that do not have Wi-Fi® certification.

• A wireless LAN access point is required to connect the TV to

the Internet using a wireless LAN. See the operation manual

of your access point for setup.

● How to connect

1 Switch on your router before starting the network

installation.

2 Connect the

AN-WUD630

USB adapter

(sold

separately) to the USB Wi-Fi port on the TV.

• Do not use a wireless LAN adapter other than the

AN-

WUD630

Sharp wireless LAN adapter, as operations cannot

be guaranteed.

• If your wireless network is secured, have the encryption key

ready to enter on screen.

3 Go to “Settings” >”Network settings”>

“Network type”.

4 Press OK and ▲/▼ to select “Wireless”, and then

press OK.

The "Wireless" connection will be automatically selected if the TV

detects only the wireless USB adapter.

Wireless installation

Select "Wireless setup".

There are three ways to connect by wireless the TV

to a network:

•

• Easy setup

1 Select WPS configuration and press OK. Press

▼ to select "PBC" and press OK.

2 Press ▼ to select Start scan and press OK.

3 Press the WPS button on the router/access point

(AP). Wait until the connection is established.

• If connection failed, please be sure WPS feature is

enabled (See the operation manual of your router/access

point(AP) for setup.)

• In case of router/access point does not support WPS,

write the encryption key for that network using the

software keyboard. See Assisted Setup explanation.

• To establish the connection manually select "PIN",

press OK, select Start scan and press OK .Follow the

on-screen instructions and the operation manual of the

router/access point(AP).

•

• Assisted setup

Shows the network name list (SSID).

1 Select the network you want to connect.

If network is protected, introduce the encryption key

using the software keyboard and press Green button.

3 Select Done and press OK.

The TV will connects to the network you have selected.

•

• Manual setup

Allows you to establish the wireless connection introducing

all data manually.

•

• Advanced Network Setup

Allows you to introduce manually all network setup.

•

• Network Connection Test

Check the connection status

NOTE

• To connect your TV to the internet, you must have a

broadband internet connection.

• If you do not have a broadband internet connection, consult

the store where you purchased your TV or ask your internet

service provider or telephone company.

• There is no need to enter the security key for subsequent

connections to the wireless network.

• If your access point is set to a stealth mode (Hidden SSID,

that prevents detection by other devices), you may not be

able to establish a connection. In this case, disable the

stealth mode on the access point.

• To change wireless LAN connection settings, go to

“Settings” > “Network Settings”.

• Any low bandwidth adapter (router, hub, wireless access

point,…) will show poor network connection and then, poor

streaming quality. It’s recommended 56 Mbps or higher

bandwidth for full feature.

• Working close to other Wireless/Bluetooth network, can

appear some trouble using Wi-Fi adapter on the Connected

TV. Due to wireless link cannot be guarantee, please try to

change Wi-Fi channel on Access Point (AP) for avoiding

interferences. Please refer to Access Point User Manual.

2 Connect the ETHERNET terminal on the TV to the

router (commercially available) with an ETHERNET

cable (commercially available).

3 Go to SETTINGS >”Network settings”> “Network

type”.

4 Press OK and ▲/▼ to select “Wired”, and then

press OK. The wired connection will be automatically

established.

To change the settings manually go to “Advanced

Network Setup”> IP Adress Setup> Off, now you

can introduce the settings manually.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-46LE730E Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-46LE730E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info