Bedienungsanleitung Sharp LC-46LE810E (Seite 49 von 64) (Englisch)

453031

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Adjusting the PC image

automatically

Option

Auto sync.

This function enables the screen to be automatically

adjusted to its best possible condition when the analogue

terminals of the TV and PC are connected with a

commercially available DVI/RGB conversion cable, etc.

Press b to select “EXT 3” from the “INPUT”

menu, and then press ;.

Go to “Menu” > “Setup” > “Option” >

“Terminal setting” > “Input select” > select

“RGB”.

Go to “Menu” > “Setup” > “Option” >

“Terminal setting” > “PC input” > “Auto sync.”.

NOTE

When “Auto sync.” is successful, “Auto Sync completed

successfully” displays. If not, “Auto sync.” failed.

“Auto sync.” may fail even if “Auto Sync completed

successfully” displays.

“Auto sync.” may fail if the PC image has low resolution, has

unclear (black) edges, or is moved while executing “Auto

sync.”.

Be sure to connect the PC to the TV and switch it on before

starting “Auto sync.”.

“Auto sync.” can be executed only when inputting analogue

signals through the EXT 3 terminal.

•

Adjusting the PC image manually

Option

Fine sync.

Ordinarily you can easily adjust the picture as necessary

to change image position using “Auto sync.”. In some

cases, however, manual adjustment is needed to

optimise the image.

Press b to select “EXT 3” from the “INPUT”

menu, and then press ;.

Go to “Menu” > “Setup” > “Option” >

“Terminal setting” > “Input select” > select

“RGB”.

Go to “Menu” > “Setup” > “Option” >

“Terminal setting” > “PC input” > “Fine sync.”.

Press a/b to select the specific adjustment

item.

Press c/d to adjust the item to the desired

position.

Item

H-Pos.

Centres the image by moving it to the

left or right.

V-Pos.

Centres the image by moving it up or

down.

Clock

Adjusts when the image flickers with

vertical stripes.

Phase

Adjusts when characters have low

contrast or when the image flickers.

NOTE

For resetting all adjustment items to the factory preset values,

press a/b to select “Reset”, and then press ;.

“Clock” and “Phase” in the “Fine sync.” menu can be adjusted

only when inputting analogue signals through the EXT 3

terminal.

•

PC compatibility chart

Resolution

Horizontal

frequency

Vertical

frequency

Analogue (D-

Sub)

Digital (HDMI) VESA standard

VGA 640 x 480 31.5 kHz 60 Hz

4 4 4

SVGA 800 x 600 37.9 kHz 60 Hz

4 4 4

XGA 1,024 x 768 48.4 kHz 60 Hz

4 4 4

WXGA 1,360 x 768 47.7 kHz 60 Hz

4 4 4

SXGA 1,280 x 1,024 64.0 kHz 60 Hz

4 4 4

SXGA+ 1,400 x 1,050 65.3 kHz 60 Hz

4 4 4

UXGA 1,600 x 1,200 75.0 kHz 60 Hz

4 4 4

1080p 1,920 x 1,080 67.5 kHz 60 Hz

4 4

VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA

are registered trademarks of International Business

Machines Corporation.

NOTE

This TV has only limited PC compatibility, correct operation can

only be guaranteed if the video card conforms exactly to the

VESA 60 Hz standard. Any variations from this standard will

result in picture distortions.

•

Connecting a PC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-46LE810E Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-46LE810E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info