Bedienungsanleitung Sharp LC-46LE925E (Seite 37 von 84) (Englisch)

453063

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Channel settings

Setup

Quick start

Auto installation

View setting

Channel settings

CH list

:Back:Enter

Individual setting

View setting

Auto installation

The TV automatically detects and stores all available

services in your area. This function also allows you to

perform the channel setting for digital, satellite and

analogue individually and reconfigure the settings after

the initial auto installation has been completed.

1 Go to “Menu” > “Setup” > “View setting” >

“Auto installation”.

2 Press c/d to select “Yes”, and then press

3 Press a/b/c/d to select the desired

language, and then press ;.

NOTE

• PIN input is required when executing “Auto installation”. The

default PIN is “1234”. To change the PIN setting, refer to

Password/Lock settings (Page 38). To clear the PIN setting

(PIN input will no longer be needed), refer to CLEARING THE

PIN (Page 69).

• You cannot set the Home/Store setting and the country

setting in “Auto installation” in the “Setup” menu. If you want

to reconfigure those settings, automatically execute initial auto

installation after executing “Reset” from the “Setup” menu.

• The current country setting is displayed on the screen.

4 Press a/b to select the broadcast standard

you want to search, and then press ;.

E Digital search

After selecting the service you want to search,

either “Terrestrial” or “Cable”, refer to Digital

broadcast setting on pages 13_14.

E Analogue search

The TV searches for, sorts and stores all the

receivable TV stations. Refer to Analogue

broadcast setting on page 14.

E Satellite search

After selecting “Satellite search”, the current

DVB-S/S2 setting screen is displayed. Refer

to the “Satellite search” setting on pages 15_16.

NOTE

• After selecting “Next” in the DVB-S/S2 setting screen, you need

to select your preferred satellite broadcast to start searching.

View setting

Programme setup

You can reconfigure the DTV service settings

automatically or manually.

1 Go to “Menu” > “Setup” > “View setting” >

“Channel settings” > “Programme setup”.

2 Press a/b to select the broadcast standard

you want to reconfigure, and then press ;.

NOTE

• PIN input is required when executing “Programme setup”.

The default PIN is “1234”. To change the PIN setting, refer to

Password/Lock settings (Page 38). To clear the PIN setting

(PIN input will no longer be needed), refer to CLEARING THE

PIN (Page 69).

Digital setting

Terrestrial

You can reconfigure the following settings when you

select “Terrestrial” in the initial auto installation or the

“Auto installation” menu.

E Additional search

Use this menu to add new services automatically after

“Digital search” in the “Auto installation” menu has been

completed.

E Manual search

Add new services within a specified frequency band.

• Enter the frequency using 0_9 numeric buttons.

• You can perform “Manual search” with a service number only

when the five Nordic countries have been selected in the

country setting.

Basic adjustment

LC-46LE925E_GB_ver4.indd 35LC-46LE925E_GB_ver4.indd 35 2010/08/07 10:58:382010/08/07 10:58:38

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-46LE925E Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-46LE925E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info