Bedienungsanleitung Sharp LC-46LE925E (Seite 66 von 84) (Englisch)

453063

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Enjoying 3D image viewing

Viewing 3D images

NOTE

• The TV screen may temporarily become black when the TV is

trying to detect a 3D image signal and when switching from 3D

to 2D mode.

Receiving a 3D image signal that

can be detected automatically

The image signal may contain a 3D identification signal.

You can enable the TV to automatically detect the 3D

image type (Page 63).

1 Go to “Menu” > “Setup” > “Option” > “3D

setup” > “3D auto change”.

E When “3D auto change” is set to

“Yes”

• The 3D display format is detected automatically and the

appropriate 3D image is displayed.

E When “3D auto change” is set to

“No”

1 The confirmation message is displayed. Press

3D.

2 Press c/d to select “Yes”, and then press

2 Turn on the power of the 3D glasses, and then

wear the 3D glasses.

• Press the power button for at least two seconds.

• The LED light blinks three times.

NOTE

• If you do not want to switch to 3D mode automatically, set “3D

auto change” to “No”.

• When the TV is receiving a 3D image signal that can be

detected automatically, the 3D mode icon is displayed in the

channel display.

Switching 3D to 2D mode

When you press 3D while you are watching the TV in 3D

mode, the TV switches to 2D mode.

1 Press 3D during the 3D mode.

2 Select “Yes”, and then press ; to switch to

2D mode.

3 Take off the 3D glasses and turn off the power

of the 3D glasses.

• Press the power button for at least two seconds.

• The LED light lights for two seconds.

NOTE

• If the input signal switches to 2D, 2D images are displayed

automatically.

• 3D mode is canceled automatically when the setting is

changed, input source is changed, the input signal resolution is

changed or the power is turned off.

Receiving a 3D image signal that

cannot be detected automatically

When the TV receives a 3D image signal that cannot be

detected automatically, you can select between 3D and

2D image viewing.

1 Press 3D.

• A screen appears prompting you to select between 3D

and 2D image viewing.

2 Press c/d to select “3D” or “2D”, and then

press ;.

E To view in 3D mode

1 Press c/d to select the 3D signal type (“2D

s 3D”,“Side by Side” or “Top and Bottom”),

and then press ;.

Side by Side

Top and Bottom

• If you select the same system as that of the input signal,

3D images are displayed.

• You can select only “2D s 3D” in ATV mode.

Turn on the power of the 3D glasses, and then

wear the 3D glasses.

• Press the power button for at least two seconds.

• The LED light blinks three times.

E To view in 2D mode

• Switching from 3D to 2D mode.

Press c/d to select the 2D signal type (“Side by

Side” or “Top and Bottom”), and then press ;.

Side by Side

Top and Bottom

• If you select the same system as that of the input signal,

2D images are displayed.

LC-46LE925E_GB_ver4.indd 64LC-46LE925E_GB_ver4.indd 64 2010/08/07 10:59:132010/08/07 10:59:13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-46LE925E Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-46LE925E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info