Bedienungsanleitung Sharp lc 46lu700e (Seite 31 von 52) (Englisch)

144957

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Analogue setting

You can reconfigure the analogue TV channels settings

automatically or manually.

Additional search

Use this menu to add new services automatically after

“Analogue search” in the “Auto installation” menu has

been completed.

Start searching channels after selecting the colour system and

sound system.

Manual adjust

Use this menu to set up analogue TV channels manually.

After selecting “Yes” on the screen, press

a/b/c/d to select the channel you want to

set and then press ;.

Fine

You can adjust the frequency to the desired position.

NOTE

Adjust while checking the background picture as a reference.

Instead of pressing c/d to adjust the frequency, you can set

by directly entering the frequency number of the channel with

0_9 numeric buttons.

EXAMPLE

179.25 MHz: Press 1 > 7 > 9 > 2 > 5.

49.25 MHz: Press 4 > 9 > 2 > 5 > ;.

Colour sys.

Select the optimum colour system to receive (“Auto”,

“PAL”, “SECAM”).

Sound sys.

Select the optimum sound systems (broadcasting

systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).

Label

When a TV channel sends its network name, the “Auto

installation” detects the information and assigns a

name to it. However, you can change channel names

individually.

Press a/b/c/d to select each character of

the new name for the channel, and then press

Repeat step 1 above until the name is fully

spelt out.

NOTE

The name can be five characters or less.

If a channel name is less than five characters, select “END” to

set the channel name.

•

Skip

Channels with “Skip” set to “On” are passed over when

using :r/s even if selected while watching the image

from the TV.

Decoder

When connecting a decoder to the TV, you need to select

“EXT 1” or “EXT 2”.

NOTE

The factory preset value is “Off”.

Lock

You can block the viewing of any channel.

NOTE

See “Child lock” for setting a PIN.

When “Lock” is set to “On” for a channel, “Child lock has been

activated” displays, and the image and sound of the channel

are blocked.

When pressing 6 while “Child lock has been activated”

displays, the PIN input window will display. Inputting the correct

PIN unlocks the “Child lock” temporarily until the power is

turned off.

Sort

Channel positions can be sorted freely.

Press c/d to select “Yes”, and then press

Press a/b/c/d to select the channel you

want to move, and then press ;.

Press a/b/c/d to move it to the desired

position, and then press ;.

Repeat steps 2 and 3 until all desired channels

are sorted.

Erase programme

Channels can be erased individually.

Press c/d to select “Yes”, and then press

Press a/b/c/d to select the channel you

want to erase, and then press ;.

A message window pops up.

Press c/d to select “Yes”, and then press

; to erase the selected channel. All the

subsequent channels move up.

Repeat steps 2 and 3 until all desired channels

are erased.

•

Basic adjustment

LC-LE705E_GB.indd 29LC-LE705E_GB.indd 29 2009/10/09 14:13:122009/10/09 14:13:12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp lc 46lu700e Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp lc 46lu700e

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info