Bedienungsanleitung Sharp LC-48CFG6002E (Seite 6 von 72) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

654863

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite



What is included in the box

Supply of this TV includes following parts:

• 1x TV • 1x RF cable

• 1x Remote control • 1x TV stand installation packet

• 2x AAA batteries • 1x User guide

• 1x mini component adapter

cable

• 1x mini composite adapter

cable

• 1x SCART adapter cable



Attaching the Stand

Please follow the instructions on last page of this user manual.



Getting started - initial set up

1. Using the RF cable supplied, connect the TV to the TV Aerial wall

socket. Connect the power cable to the Electrical outlet.

2. For connecting to the Internet with a wired connection connect a

Cat 5/Ethernet cable (not included) from the TV to your broadband

modem/router.

3. Insert the batteries supplied into the Remote control.

4. Then press Standby button to power on TV.

5. You will be now welcomed with the First Time Installation screen.

If it does not appear, on the remote control, please press [MENU] then

8-8-8-8 and the menu will appear.

If you wish to make changes to any of the default settings, use the

scroll ▲/▼/◄/► buttons. To exit this menu at anytime, press [EXIT]

button.

6. Please set desired settings in First Time Installation screen.

STEP 1 - Set the TV Menu language.

STEP 2 - set your country

STEP 3 - Set type of network connection. If you wish to skip this step

and connect TV to network later, please choose Skip Network Setting

STEP 4 - Select the location of TV. For home use, please select Home.

For shop demonstration mode, set Store.

STEP 5 - choose if your TV has stand, or if it is mounted on the wall. TV

will set optimal audio settings for selected option.

STEP 6 - choose input source which you want to use. If you have

connected RF cable directly to TV, choose DTV. If you have satellite

directly connected to your TV, choose DVB-S*. In case you are using

set-top-box, please pick correct input to which it is connected.

7. If you selected in last step DTV or DVB-S2, you will be asked if you

want to tune channels. If you choose “No”, you can tune channels later

from SETTINGS/CHANNEL menu. If you choose “Yes”, tuning menu

will appear.

Digital TV (DTV) tuning: In DVB Antenna, please choose which type

of signal you have. Terrestrial (DVB-T) or Cable (DVB-C). Then enter

Auto tuning and set your desired settings. Again choose Auto tuning

to start tuning of channels.

Satellite (DVB-S2) tuning*: Enter Auto Tuning and enter Satellite.

Here you can choose between the various satellites. Select satellite

which you wish to tune by pressing OK button on remote control.

Then return to previous menu by pressing BACK button on your

remote control and choose Auto tuning to start tuning of channels.

NOTE: To shorten tuning time of satellite channels, some countries

have preinstalled channel list for most popular satellite in that region.

If this is the case for your selected country, you will be asked if you

wish to load preinstalled channel list. If you choose “Yes”, satellite

channel list will be imported to your TV within few seconds.

TIP: If you are missing channels, the reason for this is likely to be signal

strength, you should consider connecting signal booster and re-tuning the TV.

* - Available only for TVs with DVB-S tuner



Remote control

1. STANDBY – Switch on TV when in standby or vice versa.

MUTE – Mute the sound or vice versa.

3. 0 – 9 – to select aTV channel directly.

4. TV GUIDE – Opens the 7 Day TV Guide (Digital mode).

– To return to the previous channel viewed.

6. PICTURE – Scrolls through picture mode options.

7. VOL ▲/▼ – To increase / decrease the sound level.

8. CH ▲/▼ – To increase or decrease the channel being watched.

9. SOUND – Scrolls through sound mode options.

10. SOURCE – To display the input/source menu.

11. MENU – To display OSD menu.

12. EXIT – To exit all menus.

13. (▲/▼/◄/►/ OK) – Allows you to navigate the on-screen menus and

adjust the system settings to your preference.

14. BACK – Back to previous menu.

15. FAV – To display favourites menu.

16. INFO – Press once for now/next channel information. Press twice for

programme information about current programme.

17. TEXT – Teletext mode - To enter Teletext

18. SUBTITLE – To switch the dialogue at the bottom of the screen (on/

o ).

19. TV – Switch to digital TV source.

20. YouTube – Displays YouTube application

21. NETFLIX* – Displays NETFLIX application

22. NET+ – Displays AQUOS NET+ menu.

23. Rec

– PVR Record

24.

– To restart the current chapter

25.

– To advance forward to the next chapter

26.

– To stop the playback

27. Rec List

– Opens the list of recordings.

28.

– To play in fast rewind mode.

29.

– To play in fast forward mode.

30.

– To play/pause

31. COLOUR BUTTONS

– Additional teletext and OSD functions

- available only with PVR function

* - Net ix is only available on selected models

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-48CFG6002E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info