Bedienungsanleitung Sharp LC-49CUG8462 (Seite 32 von 40) (Englisch)

679581

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

General I would like to have louder

sound by connecting additional

speakers. For TV models with

digital optical audio output.

1) Use the 3.5mm headphone output and a 3.5mm to phono cable (available

separately) to connect to an ampliﬁ er/surround sound system. Please note this

will deactivate the TV’s built in speakers.

2) Connect a digital optical audio cable from the TV’s digital optical audio output

to your ampliﬁ er/surround systems digital optical audio input.

General Why are some options in the menu

unavailable and greyed out.

Some options are only available in certain sources, i.e. HDMI. They are

unavailable in the other sources where they have no a ect.

General Can I stop my TV automatically

turning o after 4hrs?

Yes, in the ‘Time’ menu settings, scroll down to Auto standby and select OFF.

TV I have tuned in Digital TV but I

am not receiving any or all of the

channels and/or the channels I

receive are breaking up.

1) Check you are in an area that can receive Freeview/Saorview, visit www.freeview.co.uk or

www.saorview.ie

2) Check you are using an aerial that is able to receive a good digital signal. In most cases,

you will need an outdoor digital hi-gain/wideband aerial. In areas that have excellent

digital coverage, you may be able to use a loft type aerial but it is highly likely that you will

also need to connect a booster between the back of the TV and the TV aerial wall socket.

Unfortunately, to receive a good enough digital signal, it is not possible to use a portable/

indoor type aerial.

TV I have re-tuned my television but

when I switch it o it is not storing

the channels.

If the TV does not save the channels when you power it o , it’s likely the channel database

has become corrupt.

1) Turn o the TV.

2) Remove the RF/Aerial cable from the rear of the TV and then turn the TV back on again.

3) Using the remote control, press Menu followed by 8-8-8-8 to enter the initial setup/ rst

time installation menu.

4) Press OK (let the TV run the full tuning process).

5) Once completed, turn o the TV, reconnect the RF/Aerial cable then turn the TV back on

again.

6) Repeat steps 3 & 4.

VCR/DVD

Recorder

I have connected the TV to my VCR

or DVD Recorder via SCART but it is

not recording.

In addition to connecting via SCART, you should connect the aerial cable from the wall

socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to

the TV.

Game Consoles I have connected my Playstation/

Xbox to the TV via HDMI, but I am

not receiving any pictures or sound

on my TV

1) Ensure the TVs’ source is set to HDMI.

2) Check your settings on your Playstation/Xbox are as per the Playstation/Xbox

instruction manual.

Game Consoles I have connected my Playstation/

Xbox to the TV via Component

cables (red, green & blue) but I am

not receiving any sound.

Component cables only provide HD pictures. For the sound you will need to connect the

red & white audio cables on the Playstation/Xbox to the red & white phono inputs (or mini

AV input where  tted) on the rear of the TV. Please refer to the ‘Connections’ pages.

System Lock I have changed the password

on the television and now

forgotten it.

There is a master password of 4711, to gain access to the TV menu and reset the

normal password.

USB Mode I have inserted a USB Memory Key,

but the TV does not recognise it.

Ensure the USB Memory Key is formatted to type FAT32.

USB Mode Using a USB portable hard drive /

larger than 32GB.

If you wish to use a portable hard drive larger than 32GB, please note that it must be

formatted to the FAT32  le system in order to operate on this TV. Windows XP/Vista

computers are only capable of formatting up to 32GB, therefore, you will need a software

programme/utility to format larger hard drives.

Please refer to the website, www.umc-uk.co.uk, for more information.

USB Record I cannot change the channel, access

the menu or use the red button.

During time shift you cannot change the channel, access the menu or use the red button.

USB Record When using the USB to record the

picture ‘breaks up’ or experience

loss of sound.

Check the USB memory stick meets the minimum read speed requirements. Standard

de nition channels require a read speed of 20 MB/s (Mega Byte per second) and a write

Speed of 6 MB/s (Mega Byte per second) HD channels require the read speed of 80 MB/s

(Mega Byte per second) and a write speed of 40 MB/s (Mega Byte per second). USB 3.0 sticks

should normally ne used where possible.

FREQUENTLY ASKED QUESTIONS

General Information

Sharp - User Guide - SHA-MAN-0194- Smart-UHDTV - 846-K models.indd Sec1:32Sharp - User Guide - SHA-MAN-0194- Smart-UHDTV - 846-K models.indd Sec1:32 15/11/2016 15:27:1115/11/2016 15:27:11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-49CUG8462 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info