Bedienungsanleitung Sharp LC-49SFE7452E (Seite 8 von 88) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

635723

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite



Choosing Mode Input/Source

To switch between the di erent input/connections.

a) Using the buttons on the remote control:

1. Press

[SOURCE/ AV] - The source menu will appear.

2. Press

[▼] or [▲] to select the input you require.

3. Press

[OK].

b) Using the buttons on the Television:

1. Press

[SOURCE].

2. Scroll up / down using

CH+/ CH- buttons to the input/source you

require.

3. Press Vol+ to change input/source to the one selected.



Connections

Please see the table for connector types for

di erent models available on the page 84.

USB

USB-Input 1, 2

HDMI 1, 2, 3(MHL) in

HDMI-Input 1, 2, 3

VGA(PC)

VGA PC-Input

VGA (PC) Audio In

3.5mm PC audio input

Mini AV

Video Input & Component / Video audio input

Mini YPbPr

Mini Component HD Input

SCART

SCART-Input

CI Card IN

CI input

RF In

RF / TV Aerial Input

Sat In *

Satellite Input

Digital Optical Audio Out

Digital optical output

RJ 45

Ethernet

HEADPHONES

3.5mm Headphone output

* - Only on supported devices



TV Menu navigation

To access this menu, press [MENU] button on the remote control. To enter

amenu press

[OK]. If you wish to make changes to any of the default

settings, use the scroll

(▲/▼/◄/►) buttons. To con rm any settings press

[OK] button. To exit this menu at anytime, press [EXIT] button.



Picture

Picture Mode - Choose from the following presets.

 Standard - Default settings

 Dynamic - Recommended settings for fast moving pictures

 Mild - Set to be lighter in colour and less bright

 Personal - Lets you manually alter all the settings

 Eco - Consume 15% less energy.

Contrast - Switch the balance between black and white.

Brightness - Increase or decrease the brightness of the picture.

Tint - Lets you increase or decrease the level of tint

within the picture (for NTSC signal only)

Colour - Increases the colour from black and white.

Sharpness - Increase or decrease the sharpness of the picture.

Backlight adjusting - Adjust the screen's brightness by

increasing/decreasing the panel's backlighting.

Colour Temperature - Choose from the following presets.

 Normal - Default settings

 Warm - Increases red within the picture

 Cold - Increases blue within the picture

Red - Adjust red tone of the picture

Green - Adjust green tone of the picture

Blue - Adjust blue tone of the picture

Gamma - Adjust the tones between the bright

and dark parts of the picture.

Aspect Ratio - Picture format varies depending on the channel/broadcast.

There are a number of di erent options to best meet your needs.

 Auto-Automatically displays the best picture format.

So the picture is in the correct position. May have

black lines at the top/bottom and/or sides.

 4:3 - Displays the 4:3 picture in its original size. Side

bars are shown to  ll the 16:9 screen.

 16:9 - Fills the screen with a regular 16:9 signal.

 Zoom 1/2 - The picture is the correct proportion

but zoomed in to  ll the screen.

 Dot by Dot (HDMI) - Will display the picture in its

original resolution without any change.

 Full Screen - Stretch signal to  ll the screen.

Noise Reduction - Filters and reduces the

noise (interference) of the picture

MPEG Noise Reduction - Allows you to reduce visible

interference caused by MPEG compression.

Active Contrast - Automatically optimises the ‘backlight’ and

‘contrast’ of the picture according to the brightness of the screen.

3D Settings

TIP: For the best 3D picture e ect, watch your TV from vertical angle +/- 10°.

3D Type - 3D Type- When connecting a3D product sometimes

the picture maybe displayed incorrectly; choose from the

following settings to correct this. You can toggle these

settings by pressing the ’3D' button on your remote.

 O - Turns 3D o

 Auto - Automatic 3D mode setting.

 Side by Side - 3D format is commonly used in 3D broadcasting,

works by halving the horizontal resolution of videos to store left

and right eye images in each frame. It e ectively displays up to 960

x 1080-pixel pictures to each eye, enabling TV stations to telecast

3D content at amuch lower bandwidth compared with 3D Blu-ray

discs. Typical supported resolutions are limited to 720p and 1080i

for 3D TV programs. Users will need to manually select the correct

3D format to properly display side-by-side 3D content on a3D TV.

 Top Bottom - 3D format is alternative for 3D broadcast, which

is pretty similar to side-by-side 3D except that it halves the

vertical resolution instead. Available primarily up to 720p

resolution, top-and-bottom 3D o ers 1,280 pixels horizontally.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-49SFE7452E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info