Bedienungsanleitung Sharp LC-70LE741E (Seite 17 von 80) (Englisch)

475402

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Digital broadcast setting

Press c/d to select “Terrestrial” or “Cable”,

and then press ;.

Terrestrial

Cable

Searching for terrestrial broadcasts

The TV searches for, sorts and stores all the

receivable TV stations according to their settings

and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

NOTE

• A region or service selection screen may display

depending on the country settings or cable providers

selections. Follow the screen prompts to make the

selections.

740 series only

After searching for terrestrial channels, the screen

switches to the “Satellite search” setting (Page 16).

Searching for cable broadcasts

To change each item to the appropriate settings:

1 Press a/b to select

the menu, and then

press ;.

2 Press a/b/c/d or

0_9 to select or input

the appropriate item/

value, and then press

Scrambled stations [Yes]

Search method [Channel]

Start frequency

Network ID [None]

Symbol rate 1

Symbol rate 2

QAM modulation 1

QAM modulation 2

Reset

Search start

3 Press a/b to select “Search start”, and then

press ;.

4 Press c/d to select “Yes” to start searching

cable broadcasts, and then press ;.

5 The TV searches for, sorts and stores all the

receivable TV stations according to their settings

and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

740 series only

After searching for cable channels, the screen

switches to the “Satellite search” setting (Page 16).

Menu Description Selectable items

Scrambled

stations

Specifies if you

need to add pay-

TV services.

Yes, No

Search method

Specifies how

you search for

channels.*

Channel,

Frequency, Quick

Start frequency

From 47.0_858.0

MHz

Network ID

Specifies the

network.*

None, 0_65535

Symbol rate 1/

Symbol rate 2*

Input the value

received for

CATV.*

1000_9000

QAM

modulation 1

16, 32, 64, 128,

256

QAM

modulation 2

None, 16, 32, 64,

128, 256

I Set up “Symbol rate 2” if the cable provider uses

several symbol rates.

J Details about the “Search method” items are as

follows:

_Channel: Extracts all information from a channel

(quick, but needs corresponding TV stations).

_Frequency: Checks every frequency in range (slow).

_Quick: All services are searched by one frequency.

This menu works only when your cable provider

provides the frequency and the network ID (e.g.,

Homing channel). When “Quick” is selected,

“Scrambled stations” is automatically set to “No”, and

“None” for the “Network ID” menu cannot be selected.

K Set this to register only the specified network ID

without registering any special services.

L The symbol rates are specified by the cable provider.

Analogue broadcast setting

The TV searches for, sorts and stores all the

receivable TV stations according to their settings

and the connected antenna.

• To abort the initial auto installation in progress,

press 6.

740 series only

After searching for analogue channels, the screen

switches to the “Satellite search” setting (Page 16).

Initial auto installation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-70LE741E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-70LE741E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info