Bedienungsanleitung Sharp LC-70LE741E (Seite 24 von 80) (Englisch)

475402

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Timer setup using EPG

The TV can be switched to a programme or start

recording for time shift at the set time.

1 Press EPG.

2 Press a/b/c/d to select the programme you

want to set, and then press ;.

Back to EPG

Watch

Time shift

3 Press c/d to select “Watch” or “Time shift”,

and then press ;.

• If you select “No”, the TV returns to the EPG screen.

4 Press c/d to select “Yes”, and then press ;.

• The selected TV programme is marked with an icon.

5 Press ; to select “Back”.

NOTE

• You cannot select “Time shift” when the registered USB

storage device is not connected to the USB port.

• Only one time shift timer setting can be set.

• A combined total of 16 timer settings (“Watch” and

“Time shift”) can be set.

Cancelling the timer setup

1 Press EPG.

2 Press a/b/c/d to select the programme with

timer setup, and then press ;.

Press c/d to select “Cancel”, and then press ;.

4 Press c/d to select “Yes”, and then press ;.

Cancelling using B button on the

remote control unit

Press EPG.

2 Press B to display the timer setup list.

3 Press a/b to select the programme you want

to cancel timer setup, and then press ;.

Press c/d to select “Cancel”, and then press ;.

5 Press c/d to select “Yes”, and then press ;.

Teletext

What is teletext?

Teletext broadcasts pages of information and

entertainment to specially equipped TV. Your

TV receives teletext signals broadcast by a TV

network, and decodes them into graphical format

for viewing. News, weather and sports information,

stock exchange prices and programme previews are

among the many services available.

Turning teletext on/off

1 Select a TV channel or external source providing

a teletext programme.

2 Press m to display the teletext.

• Many stations use the TOP operating system, while

some use FLOF (e.g., CNN). Your TV supports both

these systems. The pages are divided into topic

groups and topics. After switching on the teletext,

up to 2,000 pages are stored for fast access.

• If you select a programme with no teletext signal,

“No Teletext available” displays.

• The same message displays during other modes if

no teletext signal is available.

TELETEXT

• Each time you press m, the screen switches as

shown above.

• Press m again to display the teletext on the right

screen and the normal image on the left screen.

NOTE

• Teletext will not work if the selected signal type is RGB

(Page 41).

• Teletext will not work in 3D mode.

Buttons for teletext operations

Buttons Description

:r/s

Increase or decrease the page number.

Numeric

buttons 0_9

Directly select any page from 100 to

899 by using the 0_9 numeric buttons.

Colour

(R/G/Y/B)

Select a group or block of pages

displayed in the coloured brackets at

the bottom of the screen by pressing

the corresponding colour (R/G/Y/B) on

the remote control unit.

k (Reveal

hidden

teletext)

Reveal or hide hidden information such

as an answer to a quiz.

3 (Freeze/

Hold)

Stop updating teletext pages

automatically or release the hold mode.

[ (Subtitle

for teletext)

Display the subtitle or exit the subtitle

screen.

• Subtitles will not be displayed when

the service does not contain subtitle

information.

1 (Subpage)

Reveal or hide subpages.

• Move to the previous subpage (R).

• Move to the following subpage (G).

• These two buttons are shown on the

screen by the symbols “e” and “f”.

;

Display the top menu.

• The top menu will not be displayed

when the service does not support

top menus.

MHEG-5 application (UK only)

Some services bring you programmes with the

MHEG application encoded, letting you experience

DTV interactively. When provided, the MHEG-5

application will start when you press m.

NOTE

• MHEG may not be displayed properly in 3D mode.

NOTE (741 series only)

• You can view some MHEG-5 content even if you do not

perform “Network setup”. Furthermore, “Network setup”

allows you to view additional content such as interactive

content from “HOME” > “TV Menu” > “Setup” > “View

setting” > “Network setup”.

• You cannot view MHEG-5 content when MHEG-5

content is not broadcast even if you perform the

appropriate “Network setup”. Carefully check the

broadcast programme.

Watching TV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-70LE741E Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-70LE741E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info