Bedienungsanleitung Sharp LC-70LE857E (Seite 17 von 94) (Englisch)

525798

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Initial auto installation

When the TV is powered on for the first time after

purchase, the initial auto installation wizard appears.

Follow the menus and make the necessary settings

one after another.

Confirm the following before turning on

the power

Is the antenna cable connected?

Is the AC cord plugged in?

Is the MAIN POWER switch turned on (;)?

Important information:

Satellite services are only available for the 857 model

series.

1 Press a on the TV.

• The initial auto installation wizard appears.

2 Setting the OSD language.

Press a/b/c/d to select the desired language, and

then press ;.

3 Selecting the location of the TV.

HOME

STORE

Press c/d to select where you will use this TV, and

then press ;.

• The confirmation screen pops up only when

selecting “STORE”. Press c/d to select “Yes” or

“No”.

• HOME: “STANDARD” will be the default value for

the “AV mode” setting.

• STORE: “DYNAMIC (Fixed)” will be the default

value for the “AV mode” setting. If the “AV mode”

is changed, the TV will automatically switch back

to “DYNAMIC (Fixed)” when there is no operation

using the TV or remote control unit for 30 minutes.

• STORE: A demonstration image will be displayed

after initial auto installation is completed. If you

have chosen “STORE” by mistake, go to “TV

Menu” > “Setup” > “View setting” > “Reset” >

select “HOME” again.

4 Setting the country.

Press a/b/c/d to select your country or area, and

then press ;.

• This setting screen only appears during the initial

auto installation.

NOTE

• Some functions may not display or be selectable

depending on the country setting or cable provider

selection.

5 Setting the PIN.

1 Press c/d to select “Yes”, and then press

• When “No” is selected, the PIN code setting is

skipped.

Enter a four-digit number as a PIN using the

0–9 buttons.

3 Enter the same four-digit number as in step

2 to confirm.

4 Press ;.

NOTE

• When “France” or “Italy” is selected in the country

setting, the PIN code setting cannot be skipped.

• “0000” cannot be set as the PIN code.

• When the PIN code setting is skipped, the default PIN

code (“1234”) will automatically be set.

• To change the PIN setting, refer to Individual setting —

PIN (Page 44). To reset the PIN setting (PIN input will no

longer be needed), refer to Reset the PIN (Page 79).

6 Starting channel search.

Digital search

Analogue search

Satellite search

Press a/b to select “Digital search”, “Analogue

search” or “Satellite search”, and then press ;.

• (857 series only) After performing “Digital search”

or “Analogue search”, the screen switches to the

“Satellite search” setting. You should then execute

“Yes” if you want to search for satellite channels.

• To watch both digital broadcasts and analogue

broadcasts, you should perform “Digital search” or

“Analogue search” from “Auto installation” under

the “Setup” menu (Page 41).

• When you select “Satellite search”, only satellite

broadcasts will be searched.

• If you want to search for more broadcasts, execute

“Additional search” from the “Programme setup”

menu (Pages 41_43).

NOTE

• If you turn off the power on the TV while performing a

channel search, the initial auto installation wizard will

not appear. The auto installation function allows you

to execute the installation again from “TV Menu” >

“Setup” > “View setting” (Page 41).

• The initial auto installation wizard will abort if you leave

the TV unattended for 30 minutes before searching for

channels.

• When “Italy” or “France” is selected in the country

setting, the default age restriction value is set to 18.

Initial auto installation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-70LE857E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-70LE857E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info