Bedienungsanleitung Sharp LC-70LE857E (Seite 66 von 94) (Englisch)

525798

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

Connecting to the network

To enjoy internet services, you need to connect the

TV to a router with a high speed connection to the

internet. You can also connect the TV to your Home

network server through a router or access point. The

TV connection to the router can either be wired or

wireless.

NOTE

• If you choose a wired connection to the router, you need

an ETHERNET cable (commercially available).

• If you do not have a broadband internet connection,

consult the store where you purchased your TV or ask

your internet service provider or telephone company.

• An Ethernet and wireless connection cannot be used at

the same time. Use only one of the connection types.

• A wireless LAN connection and performance cannot

be guaranteed for all residential environments. In the

following cases, the wireless LAN signal may be poor or

drop, or the connection speed may become slower.

− When used in buildings made with concrete,

reinforced steel, or metal

− When placed near objects that obstruct the signal

− When used with other wireless devices that emit the

same frequency

− When used in the vicinity of microwave ovens and

other devices that emit a magnetic field, electrostatic

charge, or electromagnetic interference

• A stable connection speed is required to play back

streaming content. Use an Ethernet connection if the

wireless LAN speed is unstable.

• Please use Category 5 ETHERNET cable.

Wired installation

Use an ETHERNET cable to connect the ETHERNET

terminal on the TV to your broadcast router as

shown below. This is recommended when enjoying

services which require stable connection speeds,

such as streaming media.

Wired connection overview





Router (commercially available)



ETHERNET cable (commercially available)



Network

How to connect

Router ETHERNET terminal

LAN



ETHERNET cable (commercially available)

1 Switch on the router (commercially available).

Refer to the router’s operation manual for

switching on.

2 Connect the ETHERNET terminal on the TV

to the router (commercially available) with an

ETHERNET cable (commercially available).

3 Go to “Network setup” > “Auto setup”, and then

press ;.

4 Press a/b to select “Wired”, and then press

5 Confirm the message on the screen and then

press ; to go to the next step.

6 Perform “Connection test” after the connection

is completed. Press c/d to select “Yes”, and

then press ;.

7 The connection test result will be displayed on

the screen. Follow the on-screen instructions for

the settings after this step.

• If you want to change the IP settings manually, go

to “Network setup” > “Manual setup” > “IP setup”

and follow the on-screen instructions and the

operation manual of the router.

Network setup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-70LE857E Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-70LE857E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info