Bedienungsanleitung Sharp LC-80LE645E (Seite 34 von 74) (Englisch)

475391

Zoom out

Zoom in

Vorherige Seite

1/74

Nächste Seite

Picture

Advanced

This TV provides various advanced functions for

optimising the picture quality.

Go to “HOME” > “TV Menu” > “Setup” >

“Picture” > “Advanced”.

C.M.S.-hue

This function adjusts the hue of a selected colour

using a six-colour adjustment system.

C.M.S.-saturation

This function increases or decreases the saturation

of a selected colour using a six-colour adjustment

system.

C.M.S.-value

This function adjusts the brightness of a selected

colour using a six-colour adjustment system.

Colour temp.

Adjusts the colour temperature to give the best

white image.

Item

High

White with bluish tone.

Mid-High

Intermediate tone between “High”

and “Middle”.

Middle

Natural tone.

Mid-Low

Intermediate tone between “Middle”

and “Low”.

Low

White with reddish tone.

R/G/B Gain (LO),

R/G/B Gain (HI)

Adjusts the white balance by

changing the value of each item.

Fine motion advanced

“Fine motion advanced” technologies provide

superior solutions for digital display picture quality

removing motion blur (“High”, “Low”, “Off”).

NOTE

• This effect is greater on fast moving images.

• These functions will have no effect in the following

cases.

1) The type of signal received is a PC signal.

2) An OSD is being displayed.

3) Teletext is activated.

• If images appear blurred, set to “Off”.

Gamma adjustment

Selects the tone difference of the brightness and

darkness of the image according to the type of

programme watched from a maximum of e 2 to a

minimum of f 2.

Film mode

Automatically detects a film-based source (originally

encoded at 24 or 25 frames per second, depending

on the vertical frequency), analyses it and then

recreates each still film frame for high-definition

picture quality (“Advanced (High)”, “Advanced

(Low)”, “Standard”, “Off”).

Active contrast

Automatically adjusts the contrast of an image

according to the scene.

DNR

“DNR” produces a clearer image (“Auto”, “High”,

“Middle”, “Low”, “Off”).

NOTE

• This function may not be available depending on the

input signal type.

Range of OPC

The brightness level range of the OPC sensor’s

automatic adjustments can be set according to

your preferences. The adjustment range of the OPC

sensor can be set to a maximum of e 16 and a

minimum of f 16.

NOTE

• This function is available only when the “OPC” setting is

set to “On” or “On:Display”.

• The maximum setting cannot be set to a smaller number

than the minimum setting.

• The minimum setting cannot be set to a bigger number

than the maximum setting.

• The maximum and minimum settings cannot be set to

the same number.

• Depending on the brightness of the surrounding light,

the OPC sensor might not operate if the adjustment

range is small.

Basic adjustment

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC-80LE645E Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LC-80LE645E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info