Bedienungsanleitung Sharp LC30HV4U (Seite 76 von 86) (Englisch, Französisch, Portugiesisch, Spanisch)

33883

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Appendix

• No power

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off/with sidebar

screen.

• Strange color, light color, or color

misalignment

• Power is suddenly turned off.

• No picture

• No sound

Problem Possible Solution

• Make sure the Display and the AVC System are connected correctly. (See page

9.)

• Check if you pressed TV POWER on the remote control unit. (See page 20.)

If the indicator on the Display lights up red, press POWER on the Display.

• Is the AC cord disconnected? (See page 19.)

• Has the main power been turned on? (See page 20.)

• External influences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after first turning on the power of the

Display and the AVC System, or unplugging the AC cord and replugging it in

after 1 or 2 minutes.

• Is the Mode switch set correctly? Slide it to the TV setting position.

• Are batteries inserted with polarity (e, f) aligned? (See page 12.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

• Is the image position correct? (See pages 47 and 48.)

• Are screen mode adjustments such as picture size made correctly? (See page

53)

• Adjust the picture tone. (See pages 31 to 35.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Check the input signal setting. (See page 50.)

• Is the sleep timer set? (See page 56.)

• Check the power control settings. (See pages 37 to 39.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean.

• Is connection to other components correct? (See pages 40 to 45.)

• Is correct input signal source selected after connection? (See page 50.)

• Is the correct input selected? (See page 50.)

• Is a non-compatible signal being input? (See page 76.)

• Is picture adjustment correct? (See pages 31 to 35.)

• Is the volume too low? (See page 23.)

• Is “Variable” selected in “Audio Out”? (See page 56.)

Troubleshooting

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near

a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC30HV4U Seite 76

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info