Bedienungsanleitung Sharp LC37D6U (Seite 54 von 61) (Englisch, Französisch, Spanisch)

33929

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

Appendix

• No power

• Unit cannot be operated.

• Remote control unit does not

operate.

• Picture is cut off/with sidebar

screen.

• Strange color, light color, or color

misalignment

• Power is suddenly turned off.

• No picture

• No sound

• Upgrade is displayed continuously.

Problem Possible Solution

• Check if you pressed TV POWER on the remote control unit. (See page 14.)

If the indicator on the TV is off, press POWER on the TV.

• Is the AC cord disconnected? (See page 6.)

• External influences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after first turning on the power of the TV

or unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Is the FUNCTION set correctly? Set it to the TV setting position.

• Are batteries inserted with polarity (e, f) aligned? (See page 7.)

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or fluorescent lighting?

• Is a fluorescent light illuminated near the remote control sensor?

• Is the image position correct? (See page 32.)

• Are screen mode adjustments such as picture size made correctly? (See page

35.)

• Adjust the picture tone. (See pages 25 to 26.)

• Is the room too bright? The picture may look dark in a room that is too bright.

• Is the sleep timer set? (See page 37.)

• Check the power control settings. (See page 28.)

• The unit’s internal temperature has increased.

Remove any objects blocking vent or clean the vent.

• Is connection to other components correct? (See pages 30 to 31.)

• Is correct input signal source selected after connection? (See page 33.)

• Is the correct input selected? (See page 33.)

• Is picture adjustment correct? (See pages 25 to 26.)

• Is “On” selected in “Audio Only”? (See page 36.)

• If, after inserting the CableCARD security module, you are unable to receive

broadcast service, remove the CableCARD security module and reinsert.

• Is the volume too low? (See page 17.)

• Is “Variable” selected in “Output Select”? (See page 36.)

• Verify your antenna cable is connected property.

• Reinsert the CableCARD security module. If the trouble still exists after reinserting

the CableCARD security module and verifying the antenna cable, please contact

your Cable Provider Company.

Troubleshooting

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly

delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near

a heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.

Storage temperature: –4°F to +140°F (–20°C to +60°C)

Troubleshooting-Digital broadcasting

■ The error message about reception of broadcast

The example of an error message

displayed on a screen

Error code Possible Solution

• Failed to receive broadcast.

E202

• No broadcast now.

E203

• Check the antenna cable. Check that the antenna is correctly

setup.

• Check the broadcast time in the program guide.

LC-32D6U(E)-053-060 05.8.8, 10:30 AM53

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC37D6U Seite 54

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info