Bedienungsanleitung Sharp LC45GD6U (Seite 23 von 103) (Englisch, Französisch, Spanisch)

33995

Zoom out

Zoom in

Vorherige Seite

1/103

Nächste Seite

Watching TV

Changing channels - Analog-TV

You can change channels in several ways.

NOTE

• While watching a broadcast, press A-ANALOG-B to view

the image received from the other tuner.

Method 1

Using CHr/s on the remote control unit or on the

display.

Method 2

1. Press FLASHBACK to switch to the previously tuned

channel.

2. Press FLASHBACK again to switch back to the

currently tuned channel.

NOTE

• FLASHBACK will not work if no channel has been

changed after TV is turned on.

Method 3

Using remote control buttons (0-9 and ENTER) to select

up to 125 channels for VHF/UHF/CATV.

To select a 1 or 2-digit channel number

(e. g., Channel 5):

Press 5s ENTER

NOTE

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

• • (DOT) can be used instead of ENTER.

To select a 3-digit channel number

(e. g., Channel 115):

Press 1s1s5

NOTE

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

• If you push “0” by itself, nothing will happen.

Changing channels - Digital-TV

You can change channels in several ways.

As well as the methods outlined below, you can also select

programs using the Channel List. (See page 86.)

NOTE

• While watching a broadcast, press DIGITAL.

■ Digital - Air (Two-part Number)

Method 1

When you press CHr/sor FLASHBACK, repeat the

same steps for Analog-TV.

Method 2

Using remote control buttons (0-9, • (DOT) and

ENTER) to select the channels including a decimal

point.

To select a 4-digit channel number

(e. g., Channel 22.1):

Press 2 s2s•(DOT) s1s ENTER

NOTE

• Complete the above steps within a few seconds.

• When you enter 0-9 and •(DOT), channel selection will

be made if there is no operation for a few seconds.

■ Digital - Cable (One-part Number)

Method 1

When you press CHr/sor FLASHBACK, repeat the

same steps for Analog-TV.

Method 2

Using remote control buttons (0-9 and ENTER) to select

the channels including a decimal point.

To select a 3-digit channel number

(e. g., Channel 310):

Press 3s1s0sENTER

NOTE

• When you enter 0-9 only, channel selection will be made

if there is no operation for a few seconds.

ANALOG-A Air

ANALOG-B Cable

115

ANALOG-B Cable

22.

DIGITAL Air DIGITAL Air

22.122.1

DIGITAL Air

310

DIGITAL Cable

310

DIGITAL Cable

Please note: your new AQUOS Liquid Crystal Television is capable of receiving the full range of cable-TV channels available

today, from the most advanced digital and HDTV channels, to the more traditional analog channels. As the transition toward

full digital TV continues, some cable-TV systems in the USA will have a mixture of analog and digital channels in their

lineups. When you are viewing analog cable-TV channels and wish to switch to viewing digital cable-TV channels, you must

press the DIGITAL button (located just below the numbers) on the remote control first. In similar fashion, when you are

viewing digital channels and wish to switch to viewing analog channels, you must press either the ANALOG-A or ANALOG-

B button (depending on whether you have your cable connected to the A or B terminal) on the remote first.

LC-45GD6U(E)-017-026 04.9.24, 7:03 AM22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LC45GD6U Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info