Bedienungsanleitung Sharp LD-26SH3U Operation Manual (Seite 47 von 69) (Englisch)

13343

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

E46

Adjusting the computer display automatically

(for analog signals)

When using the TV as a computer display for the

first time or after having changed the system

settings during use, perform an automatic screen

adjustment. "Clock", "Phase", "H-Pos.", and

"V-Pos." in "Fine Sync." of the Setup menu (PC

mode) will be set to their optimum states.

Note:

- When using the TV with a digital connection,

automatic screen adjustment is unnecessary.

TV AV

MENU PC

VOLCH

RETURN EXIT MTS MUTE

ENTER

1.Press the PC button to select the PC (analog)

mode.

"PC ANALOG" will appear in the upper-right

corner of the screen.

If "PC DIGITAL" appear, press the PC button

again.

2.Display an image that makes the entire screen

display light colors (such as a light desktop

background).

If you are using Windows, use the adjustment

pattern on the supplied CD-ROM (see page

E48).

3.Press the MENU button to display the MENU

screen.

4.Press the buttons to select "Setup".

Picture Audio Setup Option

Auto Sync.

Fine Sync.

Input Signal

Scaling [1]

Language [English]

MENU [Setup]

5.Press the buttons to select "Auto Sync.",

and press the ENTER button.

6.Press the

buttons to select "On", and press

the ENTER button.

The screen will go dark and "Adjusting" will be

displayed. After a few seconds, the Setup menu

will return.

7.Press the MENU or EXIT button to exit the

screen.

Notes:

- If you want to select a screen resolution of 1360

x 768, 1280 x 768, or 1024 x 768 when using the

TV with an analog connection, specify the

horizontal resolution in "768 Lines" for "Input

Signal" in the Setup menu (PC mode). (See

pages E47 and E51 for information on using the

menus.)

- If you want to select a screen resolution of 640 x

480 or 848 x 480 when using the TV with an

analog connection, specify the horizontal

resolution in "480 Lines" for "Input Signal" in the

Setup menu (PC mode). (See pages E47 and

E51 for information on using the menus.)

- It may not be possible to achieve correct

adjustment with the first automatic adjustment.

In such a case, try repeating the automatic

adjustment 2 or 3 times.

- If necessary due to any of the following, manual

adjustments can be performed after the

automatic adjustment. (See page E47.)

- When further fine adjustment is needed.

- When the computer's video input signals are

Composite Sync or Sync on Green. (Automatic

adjustments may not be possible.)

- When "Out of Adjust" is displayed. (When the

screen displays an entirely dark image, the

automatic screen adjustment may be disabled.

When making an automatic adjustment, be

sure to either use the adjustment pattern or try

displaying an image that makes the entire

screen very bright.)

- Automatic adjustment may not be achieved

correctly depending on what is displayed on the

screen - moving pictures or the MS-DOS prompt

etc.

02_LD-26SH3U_gb_02.P65 5/23/2005, 1:44 PM46

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LD-26SH3U Operation Manual Seite 47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info