Bedienungsanleitung Sharp LL-S201A (Seite 22 von 26) (Englisch)

526666

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Troubleshooting

If you are experiencing any problem with your display, before

calling for service, please review the following troubleshooting

tips.

There is no picture or sound.

• AretheACadapterandpowercordconnectedcorrectly?

(See page 10.)

• Isthepoweron?(Seepage13.)

There is a picture but no sound.

• Makesurethevolumeisnotsettominimum.(Seepage

18.)

• Isthesoundmuted?(Seepage18.)

• Whenheadphonesareconnected,nosoundwillcomefrom

thespeakers.(Seepage10.)

• Nosoundwillcomefromthespeakerswhenthemonitor

is in standby mode (when the power LED is orange). (See

page13.)

The video does not appear.

• IsthecablecertiedforHDMIorDisplayPort?Themonitor

willnotworkunlessastandards-compliantcableisused.

• Istheinputsignalcompatiblewiththismonitor?(Seepage

25.)

• IsthemonitorconnectedcorrectlytothePC?

• IsthePCturnedon?

• IsthePCinpower-savingmode?Trypressingakeyonthe

keyboardormovingthemouse.

• TurnofftheLCDmonitorpower,wait5secondsorlonger,

and then turn the power on again.

The video does not appear properly.

• Ifapowerfulamountofstrainisexertedonthetouch

display, a portion of the display may remain on the screen.

In this situation, turn off the monitor power, wait 5 seconds

or longer, and then turn the power on again.

The touch panel does not respond.

• IstheUSBcableconnectedproperly?(Seepage10.)

• Thetouchpanelmaynotworkproperlyifthereisalarge

contact area (e.g. if the screen is touched with the palm of

the hand).

• Isthemonitorinpen-onlymode?Touchactionisdisabled

inpen-onlymode.(Seepage14,page18.)

• Isthemonitorinnger-onlymode?Youcannottouchthe

screenwiththetouchpenwheninnger-onlymode.(See

page14,page18)

• Aremonitoroperationslocked?(Seepage20.)

• WhenthereisnosignalinputtotheLCDmonitor,actions

onthetouchpanelarenotpossible.PleaseoperatethePC

usingthemouseandkeyboard.

The response of the touch screen is slow.

Some parts of the screen do not respond.

• WhenstartingyourcomputerorconnectingtheUSBcable,

do not touch the touch panel.

• WhenstartingtheLCDmonitor,donottouchthescreen.

If the screen is touched, the monitor may not function

correctly.Inthissituation,turnofftheLCDmonitorpower,

wait 5 seconds or longer, and then turn the power on again.

• Whilethemenuscreenisdisplayed,touchactionsarenot

possible other than those for the menu screen. First exit the

menu screen and then perform the operation.

• Theremaybenoresponseiftheincludedtouchpenand

your hand on the screen are too close. In this situation,

perform the operation with the pen and your hand

separated farther apart.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp LL-S201A Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp LL-S201A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info