Bedienungsanleitung Sharp MX-4050N (Seite 873 von 915) (Englisch)

649302

873

Zoom out

Zoom in

Vorherige Seite

1/915

Nächste Seite

7-173

SYSTEM SETTINGS►SYSTEM SETTINGS

Common Functions

Auto Color Calibration (for Copy)

Auto Color Calibration (for Print)

Copy Calibration by Screen

Printer Calibration by Screen

Performs automatic color correction when the color is off.

For copying, adjust with [Auto Color Calibration (for Copy)]. For printing, adjust with [Auto Color Calibration (for Print)].

You can use [Copy Calibration by Screen] and [Printer Calibration by Screen] to perform even higher precision

adjustment of each mode.

The machine prints a test patch, the test patch is scanned, and the color is automatically corrected.

After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic

calibration.

Follow the instructions in the message to perform color adjustment.

Density Smoothing Adjustment

If uneven density occurs in a copy and others, use this function to smooth the density.

The uneven density is automatically corrected by scanning a test patch that you print.

After the [Execute] key is tapped and a test patch is printed, a message appears prompting you to begin automatic

adjustment.

Follow the instructions in the message to perform density smoothing.

If there are no problems after adjustment, perform "Auto Color Calibration (for Copy)" and "Auto Color Calibration (for

Print)".

To return the adjusted values to their factory default state, tap [Return Density Smoothing Adjustment Value to Defaults].

If you tapped [Return to the Defaults], perform adjustment of the density that you want to readjust (medium density in the

default mode).

Remove Toner Cartridge

Normally toner cartridges cannot be removed. However, when a cartridge runs out of toner, the cartridge is

automatically ejected to allow removal. If you need to remove a cartridge that still has toner, you can manually eject and

remove the cartridge.

Select the toner cartridge to be ejected and tap the [Execute] key. The selected cartridge is ejected to allow removal.

• Before executing Auto Color Calibration, check to see if the registration adjustment is correct.

If the registration adjustment is not correct, perform "Registration Adjustment."

• If the color is still off after performing Auto Color Calibration, repeating Auto Color Calibration once again may improve the

color.

If the density is still uneven after you have performed density smoothing, repeating the procedure may provide improvement.

To repeat density smoothing, you can either start from the beginning, or press the [Back] button after performing smoothing

the first time.

To remove the toner cartridge, use the operation panel on the machine. You cannot perform the cartridge removal operation

on the web screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp MX-4050N Seite 873

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp MX-4050N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info