Bedienungsanleitung Sharp MX-4070N (Seite 885 von 915) (Englisch)

649303

885

Zoom out

Zoom in

Vorherige Seite

1/915

Nächste Seite

7-185

SYSTEM SETTINGS►SETTING MODE FOR FAX

F-Code Memory Box

This section explains how to store memory boxes for various types of F-code communication.

Storing a memory box

When you tap the [Add New] key, the registration screen appears. Up to 100 F-code memory boxes can be stored for all

functions (polling memory, confidential, and relay broadcast).

Editing and deleting a memory box

When you select a memory box from the list, the edit screen appears for the box.

For information on the settings, see the following table.

Tap the [Delete] key to delete the memory box.

Settings

Item Settings

Items common to all types

Box Type

Select the type of box.

• Polling Memory: Store a memory box for F-code polling memory. The sub-address and

passcode that you store in the memory box are necessary for the other

machine to poll the machine (request transmission) using F-code

communication.

• Confidential: Store a memory box for F-code confidential communication. In addition,

store a "Print PIN" in the memory box to print faxes received by confidential

reception. The sub-address and passcode that you program in the memory

box are necessary for the other machine to send a fax to the machine by

F-code confidential transmission.

• Relay Broadcast: Store a memory box for F-code relay broadcast transmission.

Up to 30 destinations can be stored to forward the received data. The

sub-address and passcode that you program in the memory box are

necessary for the other machine to send a fax to the machine by F-code

relay request transmission.

Memory Box Name Enter a name (maximum of 18 characters) for the memory box.

Sub Address / Passcode

Enter a sub-address and passcode. A maximum of 20 digits can be entered for each

sub-address and passcode.

Separate a sub-address and passcode by a slash ("/").

Items displayed when storing a confidential memory box

Print PIN Set a "Print PIN" for confidential reception. Enter a 4-digit number.

Items displayed when storing a relay broadcast memory box

Forward Destination

Select the end recipients of the relay broadcast.

• Select the recipients from the address book.

• Select Forward Address from the Address: Select an address from the address book.

• Destination Entry: An address that is not stored in the address book can be

directly entered. Enter the address in the same way as

when storing an address for a mode.

• When programming a new memory box, a sub-address that is already programmed for another box cannot be used.

However, the same passcode can be used for more than one memory box.

• [ ] and [#] cannot be used in a sub-address.

• A passcode can be omitted.

• Do not forget the Print PIN. In the event that you forget the Print PIN or need to verify the Print PIN, contact your dealer or

nearest SHARP Service Department.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp MX-4070N Seite 885

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp MX-4070N

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info