Bedienungsanleitung Sharp pg b10s (Seite 80 von 82) (Englisch)

214299

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

-76

Glossary

Anti-Theft

If the “Keycode” set in the projector is not correctly

entered, the projector will not operate even if sig-

nals are entered.

Aspect Ratio

Width and height ratio of an image. The normal

aspect ratio of a computer and video image is 4:3.

There are also wide images with an aspect ratio

of 16:9 and 21:9.

Auto Sync

Optimizes projected computer images by auto-

matically adjusting certain characteristics.

Background

Initial setting image projected when no signal is

being output.

Border

Projects a 4:3 image fully within a 16:9 screen by

keeping the aspect ratio at 4:3.

Clock

Clock adjustment is used to adjust vertical noise

when clock level is incorrect.

CLR Temp (Color temperature)

Function that can be used to adjust the color tem-

perature to suit the type of image input to the pro-

jector. Decrease the color temperature to create

warmer, reddish images for natural flesh tones,

or increase to create cooler, bluish images for a

brighter picture.

Dot by dot

Mode that projects images in their native resolution.

Gamma

Image quality enhancement function that offers a

richer image by brightening the darker portions of

the image without altering the brightness of the

brighter portions. You can select four different

modes: STANDARD, PRESENTATION, CINEMA

and GAME.

Intelligent compression

High quality resizing of lower and higher resolu-

tion images to fit the projector’s native resolution.

Keylock

Mode that can lock the operation of projector but-

tons to prevent unauthorized adjustment.

Keystone Correction

Function to digitally correct a distorted image

when the projector is set up at an angle, smooth-

ens out jaggies on keystone images and com-

presses the image not only horizontally but verti-

cally keeping the 4:3 aspect ratio.

Lens shift

Function to adjust the position of the projection

image by using the lens shift lever to move the

lens from side to side and up and down (360°).

Password

A password is set so that changes cannot be made

in the “Anti-Theft” setting.

Phase

Phase shift is a timing shift between isomorphic

signals with the same resolution. When phase level

is incorrect, the projected image typically displays

horizontal flicker.

Resize

Allows you to modify or customize the picture dis-

play mode to enhance the input image. You can

select four different modes: NORMAL, DOT BY

DOT, BORDER and STRETCH.

sRGB

An international standard of color reproduction

regulated by the IEC (International

Electrotechnical Commission). As the fixed color

area has been decided by the IEC, the color

changes according to LCD features, so that the

images are displayed in a natural tint based on

an original image, when “sRGB” is set to “ON”.

Stretch

Mode that stretches the 4:3 image horizontally to

display it fully on a 16:9 screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp pg b10s Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp pg b10s

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info