Bedienungsanleitung Sharp QW-GD52I472X-EU (Seite 14 von 28) (Englisch)

647277

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EN-14

Combined detergents

Combined detergents may include various properties. Before using the detergent, read the instructions carefully.

Generally combined detergents produce sufcent results under certain conditions only.

Points to consider when using this type of products:

• Check the specications of the product whether it is combined or not.

• Check if the detergent used is appropriate for the hardness of mains water.

• Observe the instructions of products on packagings.

• Always put the tablets into the detergent compartment in the detergent dispenser.

• You need to contact the manufacturers and nd out about the suitable conditions of use.

• If you use appropriate products, they ensure savings in salt and/or rinse aid consumption.

• The scope of warranty for your machine does not cover any complaints caused by the use of these types of

detergents.

Recommended usage: If you want to obtain better results while using combined detergents, add salt and rinse

aid into your machine and adjust the water hardness setting and the rinse aid setting to the lowest position.

Solubility of the tablet detergents produced by different companies can vary depending on

the temperature and time. Therefore, it is not recommended to use such detergents in short

programs. It is more suitable to use powder detergents in such programs.

Warning: Should any problem, which you have not encountered before arise with the use of this type of

detergents, contact the detergent manufacturers directly.

When you stop using combined detergents

• Fill the salt and rinse aid compartments.

• Adjust the water hardness setting to the highest position and run an empty-wash.

• Adjust the water hardness level.

• Make the suitable rinse aid setting.

Filling with rinse aid and making the setting

Adequate amount of rinse aid prevents white water drops, lime stains, white lm stripshaped. It also increases

drying performance.

To put rinse aid, remove the rinse aid compartment cap by turning it.1 Fill the rinse aid compartment with

rinse to add rinse aid level indicator becomes dark;2 ret the cap and close it by turning it in a way that the

nails, correspond to one another. By checking the rinse aid level indicator on the detergent dispenser, you can

understand whether or not your machine needs rinse aid. A dark indicator b means that there is rinse aid in the

compartment, while a light indicator a shows that you need to ll the compartment with rinse aid.

The rinse aid level adjuster can be set to a position between 1 and 6. Factory setting for rinse aid is the

position 3.

You need to increase the degree of the adjuster if water stains form on your dishes after a wash,

whereas you need to decrease the degree if a blue stain is left when wiped by hand. 3

Warning: Use only those rinse aid materials which are allowed for use in the machine. As rinse aid residues left

as a result of overowing will create extremely high amounts of foam and thus reduce the washing performance,

remove the excess amount of rinse aid by wiping it with a rag.

CHAPTER -4: PREPARING THE MACHINE FOR USE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp QW-GD52I472X-EU Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info