Bedienungsanleitung Sharp QW-GX12F47ESE (Seite 21 von 29) (Englisch)

787285

Zoom out

Zoom in

Vorherige Seite

1/29

Nächste Seite

EN - 17

7.. THE CONTROL PANEL

Rotate the Programme Selection Knob

(4) to switch on the machine and select a

suitable programme for your dishes. When

the Programme Selection Knob is in the

'Off' position, the machine will not operate.

Press the Start/Pause button (3) to start

the selected programme. The Start/Pause

light will switch off and the Wash light will

iluminate. If the door of your machine is

opened during washing, the Start/Pause

light will flash and the Wash light will remain

illuminated.

The Wash, Rinse, Dry and End lights (7) on

the Control Panel indicate the status of the

programme in operation. The machine will

remain silent for 40 to 50 minutes while the

Drying light is on.

The Remaining Time Indicator (1) shows

the duration of the selected programme

and the time remaining of the programme in

operation.

NOTE: Press the Half Load button

(2) to shorten the duration of the select

programme, and therefore reduce the

energy and water consumption.

NOTE: If an extra feature has been

used, such as Delay or Half Load (1, 2),

on the most recent wash programme,

this feature will remain active on the next

selected programme. To cancel this feature

on the newly selected wash programme,

turn the Programme Selection Knob to

the 'Off' position, then turn it to select a

programme. Extra features can be activated

with the newly selected programme.

NOTE: Simultaneously press the "+"

and "-" buttons for 3 seconds to activate/

deactivate the Child Lock. When it is first

activated, “CL” will show on the Remaining

Time Indicator for 2 seconds. When it is

deactivated, “CL” will flash twice.

NOTE: When there is insufficient

dishwasher salt, the Salt Lack Warning

Indicator (5) will illuminate to indicate the

salt chamber needs filling.

NOTE: When there is insufficient rinse

aid, the Rinse Aid Lack Warning Indicator

(6) will illuminate, indicating the rinse a

chamber needs filling.

Delaying a Programme

Before a programme starts, press the "+" or

"-" button on the Remaining Time Indicator

to delay the start time of a programme for

1 hour up to 19 hours. To change the delay

time, first press the Start/Pause button, then

use the "+" and "-" buttons to select a new

delay time. To activate the new delay time,

press the Start/Pause button. To cancel the

delay time, use the "+" and "-" buttons to

set the time to '0'.

NOTE: If the Programme Selection

Knob is turned to the 'Off' position after

the delay time has been selected and the

programme started, the remaining delay

time is stored. When the knob is turned to a

new programme, the remaining delay time

will resume.

7.1. Changing a Programme

Follow the steps below to change the

programme while in operation.

Press the Start/Pause button.

After the programme stops,

select the desired programme

using the Programme

Selection button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp QW-GX12F47ESE Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp QW-GX12F47ESE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info