Bedienungsanleitung Sharp QW-NI1EI45EX (Seite 24 von 30) (Englisch)

787392

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

EN - 20

7.2. Cancelling a Programme

Follow the steps below if you would like to

cancel a programme while in operation.

Press and hold the Programme Selection

button for 3 seconds. "1" will be shown on the

display.

After closing the door of the machine,

the water discharge process will start

and continue for 30 seconds.When

the programme is cancelled, a buzzer

will sound 5 times and the.

Open the door of your machine.

The selected programme will

appear on the display.

7.3. Switching the Machine O󰀨

"00" will be shown on the display when the

selected programme is complete. Buzzer will

also sound 5 times. You can then switch your

machine off using the Power On/Off button.

Disconnect the plug and turn off the

water tap.

NOTE: Do not open the door before the

programme is complete.

NOTE: If the door of the machine is

opened or the power is cut off while a

programme is in operation, the programme

will continue when the door is closed or the

power returns.

NOTE: If the power is cut or the

machine door is opened during the drying

process, the programme will terminate.

Your machine will now be ready for a new

programme selection.

Buzzer Sound Control

To change the buzzer sound level, follow

the below steps:

1. Open the door and press Programme (2)

and Delay (4) buttons simultaneously for 3

seconds.

2. When sound setting is recognized,

buzzer gives a long sound and machine will

display last set level, from “S0” to “S3”.

3. To decrease sound level press

Programme button (2). To increase sound

level, press Delay button (4).

4. To save the selected sound level, turn off

the machine.

’’S0’’ level means all voices are off. Factory

setting is “S3”.

Save Power Mode

To activate or deactivate save power mode,

follow the below steps:

1. Open the door and press Delay (4) and

Half Load (5) buttons simultaneously for 3

seconds.

2. After 3 seconds, the machine will display

last Setting, “IL1” or “IL0”.

3. When Save Power Mode is activated,

“IL1” will be displayed. On this mode,

interior lights will turn off 4 minutes after the

door is opened, and the machine will turn

off after 15 minutes of no activity in order to

save energy.

4. When Save Power Mode is deactivated

“IL0” will be displayed. If Save Power Mode

is deactive, interior lights will be on as long

as the door is open, and the machine will

always be on unless it is turned off by user.

5. To save the selected setting, turn off the

machine.

In factory setting, Save Power Mode is

active.

Infoled 2.1 (Model Dependent)

LED Indicator State of the Machine

Red, continuous The machine is running a

program.

Red, flashing A program is cancelled.

Red, flashing

rapidly

The machine has a fault. Refer

to section "Automatic fault

warnings and what to do".

Green, continuous A program is finished.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Sharp QW-NI1EI45EX Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Sharp QW-NI1EI45EX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info