Website: http://www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
BEFORE OPERATION
SETTING THE CLOCK
7
Plug in the oven.
1. The oven display will flash:
2. Press the STOP/CLEAR key.
3. The display will show:
To set the clock, see below.
When using the oven for the first time:
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
1.
2.
3.
NOTES:
• To check the time of day during a cooking process, press DELAY START/CLOCK SET key and the time of day
will remain on the display as long as you keep your finger on the key. This does not affect the cooking process.
• If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not
been set, the display will only show when cooking is complete.
• If the electrical power supply to your microwave oven is interrupted, the display will intermittently show:
after the power is reinstated. If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
• When you want to reset the time of day, follow the above example again.
1. To set the 12 hour clock, press the DELAY START/CLOCK SET key once,
will appear in the display.
2. To set the 24 hour clock, press the DELAY START/CLOCK SET key twice,
will appear in the display.
x2
x3
1. Select the 24 hour clock. 2. To enter the hours press the 10
MIN key twice then the 1 MIN
key 3 times.
Check the display:
Example:
To set the 24 hour clock to 23:35:
x2
x5 x1x3
4. To enter the minutes press the 10 MIN
key 3 times then press the 1 MIN key 5
times.
3. To change from hours to minutes
press the DELAY START/
CLOCK SET key once.
5. To start the clock press the
DELAY START/CLOCK SET
key once.
x1
x1
x2
There are two setting modes: 12 hour clock and 24 hour clock:
x1
